Specification | |||
General Specification: | |||
Nominal diameter | 380mm/15 inch | Magnet diameter | Neodymium |
The overall diameter | 396mm | Voice coil diameter | 100mm/4 inch |
Install screw hole diameter | 376mm | Voice coil material | Copper/in-outside |
Hole diameter | 356mm | Surround design | M Type edge |
Technical Parameters: | |||
Nominal impedance | 8Ω | Sensitivity | 99dB |
Nominal power | 700W | Frequency range | 38-3200Hz |
Program power | 1400W | ||
T.S Parameters: | |||
Fs | 36.672Hz | Vas | 169.264m³ |
Re | 5.0Ω | Mms | 116.418g |
Qes | 0.306 | Bl | 20.256N/A |
Qms | 13.206 | Cms | 163.110Um/n |
Qts | 0.313 |
In 2019, Hongsing Electro-Electrical Sound experienced five years to develop a new MODEL, which named X series.
But the models still need to be improved one by one. So I respectfully request that you could point out our mistakes, and I hope we can work together to develope more products.
It is well known that sound travels by vibration of the air. The lower the frequency of the sound, the more the resonant guiding gain of the cavity is required. Therefore, engineers will focus on the x series of if voice tuning, using newly developed parts, sound more exquisite.
The material is perfect and the workmanship is exquisite. A touch of graphite around the edges, the material and technology of high-end speakers.
The lead wire of the loudspeaker is multi-stranded silver wire, and the welding place is protected by heat-shrinkable tube, which can meet the high power signal input. Neodymium magnetic loudspeaker is the most important thing to do is to dissipate heat must be good, otherwise it will heat up the work will lead to loss of magnetic, this loudspeaker is very good heat dissipation, heat hole is very large, plus voice coil elastic wave when working reciprocating movement, you can achieve easy heat dissipation. Speaker bass features good, low - frequency submergence, rich sound, loudness. Good for the 215 woofer.
Contact
Supplier