Products Info
HOME> 70W 80W All In One Solar Led Street Light >
70W 80W All In One Solar Led Street Light

70W 80W All In One Solar Led Street Light

OEM and ODM:
available
Packing:
by carton , exported standard packing
Brand:
sld
Place of Origin:
guangzhou,china
Payment Term:
tt/western union
Trade Term:
exw/fob/cnf/cif
OEM and ODM:
available
Packing:
by carton , exported standard packing
Brand:
sld
Place of Origin:
guangzhou,china
Payment Term:
tt/western union
Trade Term:
exw/fob/cnf/cif
Supplier Info.
Country / Region: / China
Product Detail

solar street light manufacturers supply lithium ion battery for solar street light SLD-SL-380 80W

While installing the 80W all in one LED solar street light, you don’t need to do the complex work of wiring underground or inside of the pole. Just put the all in one  solar LED street light on the top of the pole first, and then make a cement foundation, at last, you fix the pole with bolt. Comparing to AC street light installation, all in one  LED solar street light can save us lot of investment not only in law materials, but also in labor and time.

As a solar street light manufacturers we supply lithium ion battery for solar street light SLD-SL-380 80W Our all in one motion sensor LED solar street light has excellent performance as below:1.Solar Panels:18V 110W Mono 2.Battery:12.8V 56Ah (LiFePO4)3.LED Light Source:80W4.Lumen (LM):8000-8800lmTo click here to learn more details of our led solar street light

Product Data  

SLD-SL-380 80W All In One Solar Led Street Light

Specification

Light   Source

70W / 80W Bright LED Chip

PV Power

18V 110W Mono solar cells

Battery

12.8V 50AH/ 56Ah (LiFePO4)

Human Body Sensing

yes

Overload Protection

yes

Luminous
   Flux

All Bright

7700-8400lm / 8800-9600 lm

Energy Saving

4400-4800lm

Viewing Angle

120°

Color Temperature

3000-3500k/6000-6500k

Charge time

7-8H

Working Time

 
  Bright mode

≥10hrs

Dim mode

≥24 hrs

Working temperature

Charging temperature

-20℃~+60℃


Discharging temperature

-20℃~+60℃

Storage temperature

-20℃~+45℃

Degree of protection

IP65

The installation of a height range is recommended

8-10m

The distance of installation

25m to 35m

Product size/Packing size

1422*434*43mm/1490*485*210mm(1pcs)

Net Weight/Gross Weight

30.5kg / 32.5kg

Packing quantity

1set/carton

Loading Quantity

180sets/20GP  360sets/40GP  



The design drawing of 80w all in one solar LED street light:



How to check 80w all in one solar street light luminance scatter gram?



Product Details     



①Solar Panel
The solar panel we used for 30w all in one street light is improted from American,very high efficency and environment friendly.Solar panel turns the solar energy into DC electricity in battery during the day time,and when the night comes,the battery will light up the lamps.

②Lithium Iron Battery
We use lithium iron battery for our cree solar led street light,it has advantages of smallest size,like the cell phone's battery,most high efficency and long life span.


MPPT Controller
The multifunctional controller, can be set up.And it has circuit protection,like overcharge, discharge, short circuit, open load, lightning protection and other functions.

Integration design, easy to carry, put solar panel, LED lamp, battery and controller all in one, don't need any cable. Installation is very convenient, use iron pole, wood pole, bamboo pole, plastic pole, wall, etc will be no problem, it will can reduce a lot of cost if you buy our cree solar led street light.




Working Mode  



The solar panel converts sunlight into electricity and stored in Li-Fe battery via controller.The COB LED light will work at night automatically under the light sensor control,and provide light for different areas.The LED light will be at saving energy mode(about 30% of full power) normally when there is no motion.However,it will be switched to full power mode when PIR sensor detects motion.The full power mode will last about 30s ,and after 30s it will be switch back to saving power mode until new motion detected.It can be also pre-programmed by time schedule without motion sensor as well.That would the be firt one hour at 30% illumination,second 4 hours at full brightness,and the rest hours(befor the sun rise) at 30% illumination.

How to install 30W integrated solar led street light?
Install fuse first if present before use (remove any film under fuse)/Or to turn on the switch on the fixture.
Tool supplied to tighten security bolts provided
Face solar panel as much towards the north as possible to maximize sun exposure (and therefore battery charge.)
The trees around the solar lamps shall not affect the lighting of the lamps, otherwise, prune the trees.
It is strongly recommended not to set high and large shelters in front of lamps to avoid the sunlight.



Comparision
 



undefined

Bad quality solar street light price is cheap, but their lifespan is not that long and in return they will pollute the environment. Our integrated solar LED street light made of good material, we are aim to save energy.

The lowest repairing rate we promise, so a very strictly testing and packing of cree solar led street light is required. That is why our lead time is a little longer than other suppliers, we would rather do more job before the integrated solar LED street lights are sent out, rather than we do repair job after they are sent to the customers.

We,LINGDA always use the best quality materials for our 30w all in one solar street light,welcome to inquiry our products.



Contact

Supplier

Contact us
Tell us your Buying Requirements