Specifications:
Model name: Tesla VIII MOD original vv/vw mod
brand Name: Youngjune
Advantage: original vv/vw mod from 3v-8.5v, 7w-30w
Battery: 18650 battery inside
Color: black/silver
Material: high quality SS
Size: 28mm*138mm
Electrode: copper plated copper pin
Package: gift box
Maximum output current: 10A
Support Lowest resistance: 0.3ohm
Name Category |
Tesla VW |
Tesla VIII |
Size |
Φ 28*138MM |
Φ 28*138MM |
Color |
Black / Silver |
Black / Silver |
Net weight |
105g |
136g |
Battery |
18650 |
18650 |
Lowest resistance |
1.2Ω |
0.3Ω |
Highest output current |
5A |
10A |
Input voltage |
3.2V-4.2V |
3.2V-4.2V |
Output voltage |
3.0V-6V, by 0.1V increment |
3.0V-8.5V |
Output power |
3W-15W by 0.5W increment |
7W-30W, by 0.1W increment |
Basic Features:
1. Power Reset
When the Tesla is turned off and the OLED displays “Tesla”, the device will boot into standby after 2 seconds.
Press 5 clicks of the big button in 2 seconds, the OLED will display “Tesla”, and device is activated.
When the battery requires charging, you must take the battery out of the body, and use the charger to charge the battery.
3. OLED Display
The OLED is set to display during use it, it will show the corresponding information of what is has been set to display.
If the OLED is not displayed any information, this option has been turned off. Tesla VIII can show output power,
operation resistance, current output voltage and condition of power at the same screen, Tesla VW need to be switched
to different screen to show.
4. Safety Ventilation
The body has been constructed with built-in ventilation throughout the body and bottoms cap of the device.
5. Reverse protection& short circuit protection
If the battery is reversed, the device will not work.
It is designed to detect external short circuits .If the atomizers resistance is too low, the device will stop working.
In both cases, Tesla VW & Tesla VIII will disengage output automatically.
Operation Instruction:
The large button is your activation button, also the smoke button. It switches the device between power on and off.
5 click in 2 seconds, the device powers on, the OLED display “TESLA”, and say “system on”. 5 clicks in 2 second,
it powers off, the OLED display “TESLA”, then say “system off” on the screen.
The “-” button is used to reduce the voltage or power settings.
The “+” button is used to increase the voltage or power settings.
Press “+” and “-” button meanwhile, the screen will be locked or unlocked.
Name Category |
Tesla VW |
Tesla VIII |
Menu |
This menu function is mainly to Tesla VW, not for Tesla VIII. Tesla VIII is very easy and simple to use. (3) "LCD ON/OFF"--- Press “-” to choose, press smoke button to make sure. |
|
when it exceed the limited range of the voltage or power |
When it arrive 3V or 3W, it will cycle back to the highest setting 6V or 15W. When it arrive 6V or 15W, it will cycle back to the lowest setting 3V or 3W. |
If it arrive 7W, it will still remain 7W when you keep pressing "-". |
Operation Instruction |
If you hold the "-" button for 2 seconds, the screen will display the battery's operational voltage. |
The big button is the activation button. When you press it, the screen will show atomizer's resistance, operational output voltage, condition of power and the battery’s capacity. |
Warning |
When the output voltage of battery below 3.2V, screen will show “Low V”and stop working until a charged battery is installed. |
When the output voltage of battery below 3.2V, screen will show “Low BAT”and stop working until a charged battery is installed. |
When the atomizer's resistance is lower than 1.2 Ohms, the Tesla will show "Low Resistance" and stop working to avoid excessive current. When an output short circuit is detected, the OLED screen will show "Short". |
When the atomizer's resistance is lower than 0.3 Ohms, or an output short circuit is detected, the TESLA VIII will show "LOW RES" and stop working. |
Tesla VIII body including:
1pcs Tesla VIII body
1pcs user maual
1pcs Tesla VIII box
Contact
Supplier