Cut To Length Line for 90 Degree Lamination with Hole SC-200

SC-series 90 degree cutting line have been designed and built by SUMWIC company, equipped with tungsten carbide steel tools to cut the Non-oriented silicon steel or Oriented silicon steel, and silicon sheet can cover 25-200mm,the accuracy is +/- 0.02mm. The lamination sheet use for electric reactor, inverter and UPS.

The decoiler is made of high quality steel, match the motor from overseas with lower noise and high efficiency. The feed speed could be controlled by the Panasonic frequency converter, which best speed match with the main unit, besides, it could forward and reverse the raw material, and the electrical sheet could be back by reverse function. The decoiler with expanded function which is suitable for the different diameter of coil. The decoiler equipped with the leveling unit that make sure the flatness of silicon sheet.

Equipped with high performance Delta DVP-E Series control system, which be able to generate accurate output pulse, and make the instruction cycle more faster and stable. The program is designed to integrate sophisticated function to greatly reduce the time used by operator for data input. Besides, the self protecting program for all actions performed by the machine to avoid the damage.

Using 7 inch HMI touch screen, equipped with the ARM9 400MHz CPU, and with clear and user friendly software, which boost the data processing and image display.

SC-series 90° Strip Cutting Line equipped with three sets servo motors to realize the following actions: 

First servo motor: it is for the feeding roller unit, which connect to the reducer and roller, to accurately feed the materials to different position for processing.

Second servo motor: it is for hole punching, which supply the power for punch unit, then the silicon sheet will be punched hole, the hole could be change by change the punching unit.

Third servo motor: it is for the cutting, which connect to precision reducer, then drive the tungsten carbide cutter to cut silicon sheet.

The cutter is made of the tungsten carbide material with good abrasive resistance, besides, it has good resistance to elevated temperature which improved the cutting speed. The tungsten carbide cutter edge is more sharpper then other cutter, so the sheet is more orderly.