GuoOu GTS980 Magnetic or Non-magnetic Coating thickness gauge

This device is a portable meter. It is capable of measuring coating thickness quickly, precisely and without injury, both for the laboratory and engineering environment. It is currently widely used in manufacturing, metal processing industry, chemical industry, commodity inspection and testing fields; and is essential for material protection major.

This device meets the following criteria:

GB/T 4956─1985 non-magnetic coating thickness measurement on magnetic metal substrate, Magnetic Method

GB/T 4957─1985 non-conductive coating thickness measurement on non-magnetic metal substrate, Eddy Current Method

JB/T 8393─1996 magnetic and eddy current coating thickness

JJG 889─95 "Reluctance thickness "

JJG 818─93 "Eddy Current Thickness"

ISO 2178-1982

Features

Thickness measurement using both Magnetic Method and Eddy Current Method to measure the non-magnetic coating on a magnetic metal substrate, or non-conductive coating on non-magnetic metal substrate.

There are 7 types probes: F400、F1、F1/90°、F10、CN02、N1

There are two measurement ways：CONTINUE; SINGLE

There are two working modes：DIRECT; GROUP(A-B)

There are five statistic values: MEAN、MAX、MIN、FREQUENCY、S．DEV

There are two calibration modes and the basic one can amend the probe system deviation.

It has storage function which can save 495pcs data.

It has delete function,which can delete any single questionable data or cancel all stored data in order to make new measurement.

It can set limitation which will autoalarm if beyond the range and make analysis by column diagram.

It’s connectable with thermal printer, which can print measurement data、statistic value and limitation.

It has the function of communication with a PC, measurement and statistics can be transfer to the PC, so that the data may be for further processing.

Speaker beep while operating.

Have error hint function, through the screen or hum.

Power-off automatically when idle; manually power-off available.

Item Checklist

Technical parameters：

GT980 Coating thickness gauge optional probes parameter table probe F400 F1 F1/90 F10 N1 CN02 Working principle Magnetic induction Eddy current Measurement range(um) 0-400µm 0-1250µm 0-10000µm 0-1250(chroming on copper 0-40um) 10-200µm Lower limit of resolution(um) 0.1 0.1 10 0.1 1 Indicator deviation One point calibration(um) ±[3%H+1] ±[3%H+10] ±[3%H+1.5] ±[3%H+1] Two points calibration(um) ±[(1～3)%H+0.7] ±[(1～3)%H+1] ±[(1～3)%H+10] ±[(1～3)%H+1.5] - Measurement condition Min. Radius of curvature(mm) convex 1 Convex 1.5 straightness 10 3 straightness Dia.of the Min. Area base(mm) ф3 ф7 ф7 ф40 ф5 ф7 Min.critical thickness(mm) 0.2 0.5 0.5 2 0.3 unlimited  Base substrate Organic materials and other non-magnetic coating (such as: paint, lacquer, enamel, enamel, plastics and anodized, etc.) Non-magnetic non-ferrous metal layer (such as: chromium, zinc, aluminum, copper, tin, silver, etc.) Coating thickness less than 100µm Coating thickness more than 100µm Coating thickness less than 100µm Coating thickness >100µm Ferrous metal Tested area Dia.more Than 30mm F400 probe 0～400µm F1 probe 0～1250µm F1  probe 0～1250µmF10  probe 0～10mm F400  probe 0～400µmF1  probe 0～1250µm Contact Supplier Contact us Tell us your Buying Requirements Send Message Related Product Digital Car Paint Coating Thickness Meter Gauge galvanized Thickness Tester GM268 gloss meter GS200 High-end colorimeter GS300 convenient colorimeter You Might Also Like Fine Blanking Tooling For Lock-up Clutch-HG Wooden Design Ceramic Flooring Tile For Apple iPhone XR Loudspeaker Unit Replacement Custom sport ring miami hurricanes championship ring