Description:
Maydos Liquid Concrete Hardener is a water-based organic silicate solution used to harden both old and new concrete floors. It may be applied in one coat, but two or more coats provide improved dust control and sealing properties. It is a type of environmental product- Zero VOC , and is recommended for use around food and other odor-sensitive products. It will maximize your floor's natural life, minimize your maintenance costs and create a world-class impression.
Product Features:
1. Easy-to-use, no-preparation formula for old or new concrete floors.
2. Makes floors easier to clean, reducing maintenance costs as well as detergent and water usage.
3. Reduces dusting produced by concrete floors, protecting your environment and assets.
4. Water proof, grease and chemicals corrosion resistant.
Where to Use:
For exterior and interior concrete floors for parkings, warehouses, shopping centres, garages, and other premises with high transportation load.
Configuration of The Flooring System:
Technical Data:
Appearance: Clear and transparent water like liquid
VOC Content: Solvent-free; zero VOC
PH value: about 11
Freezing Point(℃): 0℃
Specific gravity: 1.07-1.1
Flash Point(℃): Non inflammable
Service Life: 25 years
Shelf Life: 24 months
Application Procedure:
1. Surface preparation: New Surfaces must have cured for at least 14 days and be free from curing compounds, dirt, dust, wax, grease and other contaminants.Remove the bleeding cement with vacum cleaner.
2. Application of concrete hardener A: Apply the A component with mop on the surface and keep entire surface wet for above 120 minutes to let A component penetrate the floor completely. After 120 minutes, clean the residue with vacum cleaner or scraper. The consumption quantity is 0.25kg/sqm.
3. Application of concrete hardener B: Apply the B component with mop on the surface and keep entire surface wet for above 40 minutes to let B component penetrate the floor completely. After 40 minutes, clean the residue with vacum cleaner or scraper. The consumption quantity is 0.15kg/sqm.
4.Polishing: 72 hours after the application of B component, polish the floor with the sanding machine( just change the disc to a polishing one). Last, polish the floor again with the sanding machine at a speed of 1,000 cycles/hour or higher.
5.Daily maintenance: Clean the floor with neutral or alkali detergent.
Contact
Supplier