Mini Doypack Model MDP-S adjustable for different sized bag

Mini Doypack Model MDP-S adjustable for different sized bag

Brand Name:

keepac

Place of Origin:

china

Start Port:

foshan

OEM/ODM Availability:

yes

Delivery Time:

65 days

Bag shape:

premade pouch/ doypack pouch/ pre-openned zipper pouch

Max Speed:

16 bpm

Power:

220v/50hz single phase 5 amps

Air:

6kg/cm2(0.5-0.6mpa), 0.4cbm per min(400l/mini);

Brand Name:

keepac

Place of Origin:

china

Start Port:

foshan

*Send an Inquiry to this supplier

Supplier Info.

Company Name： KEEPACKAGING CO., LTD.

Registration Date： 2010

Country / Region： guangdong / China

City： foshan

Main Products： packing machine, doypack machine,packaging machine

Product Detail

Mini Doypack Features

◪ BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation
◪ BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
◪ BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
◪ TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
◪ FILLING
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
◪ SEALING
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
◪ MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.

Working Range:

Standard: Stainless Steel 304 Frame

Model	Bag Width	Bag Length
MDP-S	100mm ~ 300 mm	100mm ~ 300 mm
MDP-L	130mm ~ 300 mm	130mm ~ 420 mm
Electronic:	Mitsubishi PLC;	Pneumatic:	Pneumatics component Airtac from Taiwan;
	Omron PID Temperature Controller;
	Delta 7 inches from Taiwan;		Piab Vacuum Generator From Sweden;

Technical Feature:

No bag No dump;

Easy Adjustable;

Low Operating & Maintenance cost;

Multi Bag Format;

InterLock, CE Application;

Mechanical:

Stainless Steel 304 Machine Frame with 3mm thickness Fabrication;
All the bearing should be Stainless Steel 304;

Safety Feature

Interlock & Safety Relay;
Interlock;

Omron Safety Relay;

Options

Pouch Auto Feeder

* Auto Feed the pouch to the machine to run continuously;

Hot Stamp Printer

* 2Lines with Maximum 13Letters;
* Letter size 2mm X 3mm

Convexity Product Settle

* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling are center on middle of the pouch. So the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show. When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;

Contact

Supplier

Tell us your Buying Requirements