Products Info
HOME> Machinery > Packaging Machine > Professional Mini Doypack Model Duplex 200 >
Professional Mini Doypack Model Duplex 200

Professional Mini Doypack Model Duplex 200

Brand Name:
keepac
Place of Origin:
china
Start Port:
foshan
OEM/ODM Availability:
yes
Delivery Time:
65 days
Bag shape:
premade pouch/ doypack pouch/ pre-openned zipper pouch
Max Speed:
30 bpm
Power:
220v/50hz single phase 5 amps
Air:
6kg/cm2(0.5-0.6mpa), 0.4cbm per min(400l/mini);
Brand Name:
keepac
Place of Origin:
china
Start Port:
foshan
OEM/ODM Availability:
yes
Delivery Time:
65 days
Bag shape:
premade pouch/ doypack pouch/ pre-openned zipper pouch
Max Speed:
30 bpm
Power:
220v/50hz single phase 5 amps
Air:
6kg/cm2(0.5-0.6mpa), 0.4cbm per min(400l/mini);
Supplier Info.
Company Name: KEEPACKAGING CO., LTD.
Registration Date: 2010
Country / Region: guangdong / China
City: foshan
Main Products: packing machine, doypack machine,packaging machine
Product Detail


Mini Doypack Features
BAG LOADING
The Pouch magazine is adjustable for different sized bag.
The Bags can be loaded while the machine is in operation

BAG DETECTION
Multiple bag detection switches are used at various points in the cycle to ensure correct bag placement and full bag opening. Should a reject bag be detected it is ejected from the machine and the process continues. Rejected bags can be inspected by the operator and re-used if good.
BAG OPENING
Pouches are individually removed from the cartridge with a unique combination of vacuum and pneumatic actuators. They are rotated/ transfered to the fill area and opened.
TRANSITION CHUTE
doubling as a timing bucket. product enters the transition chute while the bag is being opened below. Upon pouch detection the Chute/Funnel enters the bag and opens the gate. Product is dispensed immediately, without spillage and protecting the seal from contamination. Difficult product that easily bridges is dispensed into the pouch directly from the filler, through the "open-gate''
FILLING
During filling, pouches are held in place with our “positive-hold” gripper system. This allows for heavy weights and shock loads without altering bag Position;
SEALING
Digitally controlled ribbed or flat constant heat seal bars give an integral attractive seal. Pouches are sealed ''in place" eliminating wrinkles, folded corners and non aligned seals
MACHINE CONTROLS
System controls are fully solid state. utilizing a commercial Programmable Logic Controller [PLC] and Pneumatic. Indicator lights signal all cycle processes for easy monitoring.



Working Range:


Standard: Stainless Steel 304 Frame


ModelBag WidthBag Length
Duplex 200100mm ~ 200 mm100mm ~ 300 mm


Electronic:

Mitsubishi PLC;


Pneumatic:


Pneumatics component Airtac from Taiwan;

Omron PID Temperature Controller;
Delta 7 inches from Taiwan;Piab Vacuum Generator From Sweden;
Technical Feature:
1
1
No bag No dump;
1
1
Easy Adjustable;
1
1
Low Operating & Maintenance cost;
1
1
Multi Bag Format;
1
1
InterLock, CE Application;


Mechanical:
Stainless Steel 304 Machine Frame with 3mm thickness Fabrication;
All the bearing should be Stainless Steel 304;


Safety Feature


Interlock & Safety Relay;
Interlock;
Omron Safety Relay;


Options


Horizontal Zipper Opener


The zipper opener is installed horizontally;
It is separated from the infeed hopper.
It would be worked when the pouch is picked up and being horizontal. Then, it would be opened the pouch Zipper. When the pouch zipper is opened, then, it would be presented to the filling position for the infeed hopper to do the filling.
So The infeed hopper is only moved up and down, not necessary to be moved left and right as the vertical style. So the filler and collection chute could be inserted into that infeed hopper when the filler is installed. It would be reduce the free falling height and And more safety for the production.
Like the powder application, the Auger filler would be lowed into that infeed hopper to reduce the free falling height. It is good to control the dusty;

Hot Stamp Printer
* 2Lines with Maximum 13Letters;
* Letter size 2mm X 3mm

Convexity Product Settle


* It would be moved up and down to flap Pouch Bottom to settle and tight the product. It is better than the flat plate.
* The product settle should be worked during the filling. Most of the filling are center on middle of the pouch. So the product would be built the ‘little mountain’. It is better to have the convexity product as the pictures show. When it is flapped the filled pouch bottom by up and down movement, The product would be spread around inside of the pouch.
*When it is set to be work for 1 time, it would be Heavy Weight Supporter
* If the weight is over than 1kg, it needs the Heavy weight supporter When it is set to be worked for Multi Times on the Panel, it would be product settle;
* It would be flapped the bottom of the product to tight the product into the bag;


Quick Release conveyor
* Quick Release Fabrication;
* Discharge Output Height 900mm;
* Emergency Stop with Frequency inverter Speed control;


Contact

Supplier

Contact us
Tell us your Buying Requirements