● SKW-30 series CNC bending machine is designed for special processing equipment for the design of bending pipe, pipe, wire wound type bending under cold state, widely used in air conditioners, cars, furniture, sports equipment, plumbing equipment and other industries.
● This machine can bend diameter in 30*2.0 steel. The clamping diameter, core feeding institutions such as the use of hydraulic control, Y, B, C, D four axis driven by servo machine control, microcomputer control, can realize four axis bending, active, passive elbow. Complex function parameter setting and operation switch through the whole Chinese operation interface is simple, convenient and reliable. The machine has good stability, good repeatability, high efficiency characteristics, very suitable for complex pipe bending.
Equipment type | SKW30-R2 |
Machining diameter | The 30*2.0 diameter mm stainless steel tube |
Length of workpiece | 2M |
Bend radius | R5~R80㎜ |
Maximum length of machined workpiece | Active: 1400mm |
Through: 2500mm | |
Maximum bending angle | 190 degrees |
Maximum rotation angle | + 360 degrees |
Elbow efficiency | 3-5 second / bend |
Maximum feeding speed | 1000mm/S |
Maximum bending speed | 180 degrees /S |
Maximum rotation speed | 560 degrees /S |
X axis repeated positioning accuracy | ±0.05mm |
Y and Z axis repeated positioning accuracy | + 0.1 degrees |
control mode | Bend axis + feed shaft + rotating shaft + Guide mold servo push |
Power specification | 380±10V,50Hz |
Hydraulic pressure | 6Mpa, Max 25MPa |
Outline dimensions (X X in width) | 2900×900×1200mm |
Oil temperature cooling system | Water cooling, so that the oil temperature at work to ensure low temperature work |
Guided boost | Servo screw control |
Clamping die | Pushing type |
Contact
Supplier