1.Characteristics:
. YT9288 is two-component structual silicone sealant product.
. Neutral curing, non-corrosive to metal, coated glass, concrete, marble etc;
. Excellent resistance to weather, and the service life is over 50 years in the condition of general weather;
. Excellent resistance to low and high temperature change.Little changes of performance at 40~150°C;
. Excellent adhesion to most common building material without priming;
. Hig modulus,strength,adhesive property and flexibility
. Good compatibility with ither neutral silicone sealants.
. Belong to non - dissolvent product,low vulcanization Shrinkage and green environmental protection product.
2.Purpose:
. For structural glazing in glass,stone (marble,granite), aluminium curtain wall, glass roof and metal structure engineering;
. As a secondary edge adhesive sealant;
. Many other uses.
3. Typical Technology Data
No. | Performance | Standard | Measured value | Single Evaluate | |
1 | Appearance | Fine and uniform ointment,it shall not have block gel, surface coagulation and educt that cannot disperse quickly. | Conform standard | Qualified | |
2 | Slumpability(mm) | Vertical,(mm) | ≤ 3 | 1 | Qualified |
Horizontal | Non distorted | Non distorted | |||
3 | Applicable period (min) | ≥ 20 | 30 | ||
4 | Surface drying (min) | ≤ 180 | 0.8 | Qualified | |
5 | Harducss(HA) | 30~60 | 44 | Qualified | |
6 | Tension boding strength(Mpa) | 0.6 | 0.95 | GB16776-2005 | |
7 | Max.strength elongation(%) | 100 | 16.5 | GB16776-2005 | |
8 | Aging test | Loss of heating% | ≤ 10 | 1.5 | Qualified |
chop | Non | Non | Qualified | ||
pulverized | Non | Non | Qualified | ||
Stability | Store for 9 months at -20~27℃ in cool ,dry places after date of delivery |
4.Application Standard:
.National standard GB 16776-2005 Structural silicone sealant for buildings
.U.S.A ASTM C 1184-2013 Silicone Structural Sealant
.Company standard Q/(NG)YT 1-2005 Silicone Structural Sealant
. ISO9001:2008
5.Color:
.YT9288 Group A is White and Group B is Black. It is black after mixture.
6.Package:
.YT9288 double component structure sealant, 200kg of group A, 20kg of group B.
7.Restriction of Usage:
.Unsuitable for all kinds of material that can effuse grease, plasticizer or solvent;
.Unsuitable for the frosty or moist surface;
.Unsuitable for the continually soggy or moist place;
.Cannot be used if the temperature is below 4°C or above 40°C on the surface of the materials.
8.Technical Service:
Offer the integral technical data of the products.
-Adhesion test:
The products of YT928 silicone sealant have excellent adhesion to most common building material,as glass, anodized aluminium, ceramictile, granite, brick, wood, steel and most plastics. But we cannot ensure our sealants are suitable to all materials, as a result of the unceasing appearance of new building materials and the application of new surface treatment technology.In some cases, it is required to have the adhesion test on the substrates.In the laboratory of our company, we can carry out the adhesion test for clients and give the test report that includes experimental result,recommended products,cleaning methods of the material surface etc.
-Compatibility Test:
If the accessory materials like baker,double-sided glue strip can not be compatible with silicone rubber,it may cause silicone rubber to turn colors, even lose adhesion,To avoid these problems,we provide services of compatibility test for clients. Clients can send the accessory to us by mail (or other ways),then we will carry out the compatibility test and give the test report.
-Staining Test:
We provide services of pollution test for clients. Clients can send the substrates to us by mail (or other ways),then we will carry out the staining test and submit the test report.
9.Joint Design:
The joint design of silicone structural sealant must be carried out according to JGJ102 "The Technical Order of Glass Curtain Wall Engineering" by professional designers;
The width and thickness of silicone structural sealant are no less than 6mm;
The width of silicone structural sealant should be greater than or equal the thickness;
The joint of silicone structural sealant can be full of the sealant according to common working procedure;
The adhesive width and thickness design of silicone structrual sealant must be carried out according to JGJ102 "The Technical Order of Glass Curtain Wall Engineering";
The sealant should be able to exposure in the air. Cannot move the joint during the cure.
10.Working procedure:
See also "The Technology Instruction of Yuantong Silicone Structural Sealant”
11.Safety:
Non-toxicity when cured;
Avoid eye contact before curing.If happened,rinse opened eye for several minutes under running water,then consult with a doctor;
Keep away from children;
Ensure adequate ventilation at workplace or curing area.
12.Cure Time:
YT9288 begins cure from surface to deep after exposure in the air. The Tack-Free Time is about 60min, and the entire curing takes place after 21 days.
Contact
Supplier