Ø Glue Tinting Film:
It is a way of coating dark on the clear film material.It only can block
the visual light.Also durability of film is decreased and at the same
time,the problems of discoloration can be occurred.
Ø Key Features:
Ø Unique Advantage:
1,Control more than 99% harmful UV rays, Isolate 90% of heat source, IR fom sun;
2,Isolate 99% of UV rays that cause fading the trims and interior car accessories;
3,High Transparency by 73% allowing light to pass through;
4,Prevent glare from the sun, which given a sense of comfort while driving;
5,Three Brand for you to choose: Carty-series, MG-series, and Van Gogh-series;
ØSuper Carty-series:
Technology : Vaccum Magnetron Sputtering Processing;
Raw Material: Optical PET as raw mateial;Ø Physical Data:
Visible Light Transmission: | 1%--70% (Color:Black,Charcoal,Grey,Blue,Green,Olive...or can be customized) |
Visible Light Reflection: | Int: 5.2-7.8/Ext:7.4-10.4 |
Infrared Rejection: | 10%---20% |
UV Rejection: | 98%--99% |
Thickness Available: | 1.5mil |
Width Available: | 50cm, 75cm, 90cm, 100cm, 1.52m |
Length Available: | 1m, 3m, 6m, 12m, 30m, 60m,300m,600m,1200m |
Packing (rolls/ctn): | Big roll: each one with single box packing; small roll: each one with cubic box, then 50-120 rolls in one carton. |
1. Clean the glass thoroughly with detergent and water .leave no spots or dirty on it .
2. Cut your Solar Film (catch release film )to the shape of and larger size than the glass (each side extruding some or 1/4)
3. At one corner of your solar film ,apply a small piece of adhesive tape to each side ,pulling apart ,your solar film
can be easily separated from the release film .Spray water to the adhesive side of your tint solar film whilst the film
are being separated.
4. Squeeze out the water in between your solar film and the glass with squeegee.
Contact
Supplier