Surface Quality
1. There are no macular or roll marks on the surface of aluminum circle/disk.
2. There is no water corrosion on the surface.
3.The surface of aluminum circle/disk is very clean without lots of impurities.
Punch processing
1. Cutting the blank material (cut into square) 2. Blanking (punching into the disc you want)
Automatic wafer blanking production line processing
The main components of the aluminum wafer unwinding and blanking production line are: loading trolley, uncoiler, leveling machine, feeder, swing unit, special closed single point mechanical press, quick die change device, palletizing unit, scrap shear Cutting, hydraulic systems, electrical control systems, etc.
Coil width (mm): 500-1250, 800-1400, 1000-1600
Coil thickness (mm): 0.4-3.0, 1.0-6.0
Coil weight (kg): 8000, 10000
Blanking diameter (mm): 85-660, 85-750, 100-900
Number of blanks (spm): 40-55
Press nominal pressure (kN): 1250, 1600, 2000, 2500
Tempering | O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34H36,H38,H111,H112,H114,H 116,H321 |
Surface | mill,bright,polished,hair line,brush,sand blast,checkered,embossed,etching,etc |
Thickness | 0.1-150mm |
diameter | 2-2500mm |
Length | 1~2 meters or as required |
Thickness tolerance | + 0.05mm |
Width / length tolerance | + 2mm |
Minimum quantity | 5-10 tons |
Grade | Chemical Composition(%) | Others | AI | ||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Single | Tol | 99.5 |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 0.03 | - | 99.6 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 0.03 | - | 99.7 |
1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | 0.04 | 0.03 | 0.03 | - | 99 |
1100 | 0.95 | 0.05~0.4 | 0.05 | - | - | 0.1 | - | 0.05 | 0.15 | Remains | |
3003 | 0.6 | 0.7 | 0.05~0.2 | 1.0~1.5 | - | - | 0.1 | - | 0.05 | 0.15 | Remains |
3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8 | - | 0.25 | - | 0.05 | 0.15 | Remains |
3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.2~0.6 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | Remains |
3105 | 0.6 | 0.7 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | 0.1 | 0.05 | 0.15 | Remains |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | 0.1 | - | 0.05 | 0.15 | Remains |
5083 | 0.4 | 0.4 | 0.1 | 0.4~0.1 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Remains |
5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6~3.6 | 0.3 | 0.2 | 0.15 | 0.05 | 0.15 | Remains |
5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5~1.1 | 0.1 | 0.25 | - | 0.05 | 0.15 | Remains |
5086 | 0.4 | 0.5 | 0.1 | 0.2~0.7 | 3.5~4.5 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Remains |
6063 | 0.2~0.6 | 0.35 | 0.1 | 0.1 | 0.45~0.9 | 0.1 | 0.1 | 0.1 | 0.05 | 0.15 | Remains |
6041 | 0.4~0.8 | 0.7 | 0.15~0.4 | 0.15 | 0.04~0.35 | 0.04~0.35 | 0.25 | 0.15 | 0.05 | 0.15 | Remains |
Aluminum wafers are widely used in electronics, daily chemicals, medicine, culture and education, and auto parts. Electrical, thermal insulation, machinery manufacturing, automotive, aerospace, military, mold, construction, printing and other industries. Such as kitchen utensils such as non-stick pans, pressure cookers, and other hardware such as lampshades, water heater casings, stretching tanks, etc., is one of the largest aluminum alloy sheet and strip deep processing products.
Contact
Supplier