/ Product main pictures
Description of product function
The product is mufti-functional LCD solar controller with clock display and seven operating modes that are charging mode, light control mode, light and time delay control mode, universal control mode, manual control mode, timing control mode and testing mode. Among them, test mode is only applicable to the factory test.
Charging control is applicable to any mode, as long as the charging condition is reached, it can charge immediately.
Discharge control varies as different control modes change, under the trouble-free condition, specific instructions as follows:
1.Charging mode: in any case, never discharge.
2.Light control mode: when the controller detects nights, it will delay ten minutes then start to discharge; when it detects daytime, it will delay ten minutes then stop discharging.
3.Light and time delay control mode: when the controller detects nights, it will delay ten minutes then start to discharge and count down, if the timer stops by zero, discharge will stop. The longest duration of delay is 23:59.
4.Universal control mode: under the trouble-free condition, it always keep discharging.
5.Manual control mode: it uses “▼” for discharging or not.
6.Timing control mode: it opens or closes the discharge regularly.
7.Test mode: it is the same as light and time delay control mode but only loses ten minutes of time delay.
8.The controller still discharges under low voltage protection. Touch-holding “▼” for 5 seconds, discharge continues to output. But discharge is only stopped by hand.
9. Notice that this performance may damage the battery, be careful with it!
/ Protection function
Reverse polarity protection
Function: The connection of
Positive and negative cable
fault, then enter automatic
protection status: blown fuse
short-circuit protection
Function: automatic protection
status when short circuit
stop working
Over-charge protection
Function: over current then
enter automatic protection
status: auto stop
Over-discharge protection
Faction: over discharge then
enter automatic protection
status: auto stop
Not only four protection function , but also including
1). Open Circuit Protection :When open circuit controller will protect the components
2). Over Current Protection :When over current controller will cut off to protect the equipment
Suggest choosing solar inverter and controller .
If the modules are not for system , it would be burned or alarm .
/ details of of products
Quality USB for cell phone and lamps electronic charging
Two safely fuse to protect controller
/ Internal details
Imported IC component
Safe, simple , convenience
New terminal design
Efficiently thermolysis
Effectively extend the service life
Humanization Design
More convenient
High quality
Imported PC material
Inflaming retarding
shock resistance
High performance
anti-aging component.
/ Application
/ product Parameters
Model | Specification | Size | Package Size | G.W | Package |
SYC2480 | 12V/24V 80A LCD solar charge controller | 200*200*70mm | 430*420*360mm | 20kg | 20pcs/ctn |
SYC24100 | 12V/24V 100A LCD solar charge controller | 200*200*70mm | 430*420*360mm | 20kg | 20pcs/ctn |
SYC4860 | 12V/24V/48V 60A LCD solar charge controller | 200*200*70mm | 430*420*360mm | 20kg | 20pcs/ctn |
SYC4880 | 12V/24V/48V 80A LCD solar charge controller | 200*200*70mm | 430*420*360mm | 20kg | 20pcs/ctn |
SYC48100 | 12V/24V/48V 100A LCD solar charge controller | 200*200*70mm | 430*420*360mm | 20kg | 20pcs/ctn |
SYC9620 | 96V20A LCD solar charge controller | 200*200*70mm | 430*420*360mm | 20kg | 20pcs/ctn |
SYC9630 | 96V30A LCD solar charge controller | 200*200*70mm | 430*420*360mm | 20kg | 20pcs/ctn |
SYC9640 | 96V40A LCD solar charge controller | 200*200*70mm | 430*420*360mm | 20kg | 20pcs/ctn |
SYC9650 | 96V50A LCD solar charge controller | 200*200*70mm | 430*420*360mm | 20kg | 20pcs/ctn |
SYC9660 | 96V60A LCD solar charge controller | 200*200*70mm | 430*420*360mm | 20kg | 20pcs/ctn |
Rated Voltage | 12V/24V/48V |
Low Voltage Disconnection (LVD) | 10.7V/21.4V/42.8V |
Float Voltage | 13.7V/27.4V/54.8V |
Low Voltage Re connection (LVR) | 12.6V/25.2V/50.4V |
Charging mode | PWM mode |
