2020 high quality Industrial reverse osmosis membrane 8040

Being suitable for desalting such water sources as surface water (NaCl ≤10000ppm), underground
water, tap water and municipal water, etc., LP series is mainly applicable to treatment of various
industrial water such as industrial-purpose pure water, boiler water replenishment in power plants,
and can be also applied to such brackish water applications, such as treatment of
high-concentration saline waste water and production of beverage-purpose water.

1.  All data and information provided in this manual have been obtained from long-term
experiment by Vontron. We confirm the effective and accuracy of the data. assumes no liability for any aftermath caused by user’s failure in abiding by the conditions specified in this manual in use or maintenance of membrane products. It is strongly recommended that the user shall strictly
abide the designed use and maintenance requirements and keep relevant records.
2.  The permeate value listed in the table is the average value. The permeate flow of single
membrane element is tolerance not exceeding ±15% of the nominal value.
3.  All wet-type membrane elements have been strictly tested before leaving the factory, and have been treated with 1.0% sodium hydrogen sulfite (10% glycerin antifreeze required in winter) for storage purpose, then sealed with plastic bag in vacuum, and further packed in carton boxes.
4.  The membrane used should remain wet after being used; In long term suspension, to prevent the breeding of microbes, soak the membrane elements with protective solution is highly recommended, the solution (prepared with RO filtered water) containing 1.0% sodium hydrogen sulfite (foodstuff-purpose).
5.  Operate low pressure flushing for 15-25 minutes of first use, high pressure flushing for 60-90 minutes when first use (Permeate volume no less than 50% of designed volume). Discard all the permeate and condensed water produced during the first one hour after system start-up.
6.  During storage time and operation period, it is strictly prohibited to added any chemical
medicament that may be harmful tomembrane elements. In case of any violation in adding  chemical medicament, Vontron assumes no liability for any damages incurred.
7.  Along with technical development and product renovation, all information will be subject to modification without prior notification. Please keep notice the website of Vontron for any updates of the product.