20A*4ch Relay Switch Controller

- Model: IP0420-R
- Input voltage: 100-240VAC 50/60Hz
- Input control signal: DMX512(1990)/RDM,DALI,and EU-BUS signal
- Maximum output current of relay switch channel: 20A*4ch
- Maximum output signal current of 0-10V: 20mA*4ch

20A*4ch Relay Switch Controller IP0420-R

The product adopt advanced microcomputer control technology, analysis widely used DMX-512 (1990) /RDM,DALI standard protocol ,and EU-BUS protocol developed , output 4 relay switch signal and their synchronous 0-10V DC control signal. The max current of each channel of relay switch is 20A,thetotal 4 channel is 80A , the max current of each channel of 0-10V is 20mA.In addition, the device can be connected into the Dynalite system by the Dynalite gateway (Note: the Dynalite trademark holder is PHILPS, the relevant right is owned by the holder of the trademark, the same below)

Features

1. Meets DMX512(1990)/RDM,DALI IEC62386 protocol and EU-BUS protocol developed  

2. Output 4 channel relay switch signal and their synchronous DC 0-10V control signal

3. Built-in LCD, the user can operate more conveniently

4. Set fades time of each channel separately, range of 0.1-60.9s

5. Standard 35 mm din rail, convenient installation

6. Relay switch channel can be turned on and off manually

7. Can save up to 8 events

8. Suitable for intelligent lighting control - Home Furnishing, office buildings, schools, stadiums, outdoor architecture etc.

Technical Parameter