2x1 VGA cable KVM Switch w/ USB2.0
◪ Using only 1 set of keyboard, mouse and monitor to control 2 host devices
Support keyboard hot keys and front panel key to control KVM switch◪
Support resolution up to 1080P@60Hz◪
Support USB 2.0 for printers, USB drives, barcode scanner etc◪
Support hot plug, connect or disconnect devices to the KVM switch in any time and without turn off devices◪
Support Unix/Windows/Debian/Ubuntu/Fedora /Mac OS X/Raspbian/Ubuntu for Raspberry Pi and other Linux based system◪
◪ Built-in VGA and USB cable, it available to connect VGA sources directly
Power supply from USB cable◪
VKS0201C10 | 2x1 VGA Cable KVM Switch | |
Functionality: | ||
Auto Scan | Yes | |
Port selection | Front panel buttons | Yes |
Keyboard hotkeys | Yes | |
IR remote control | No | |
Mouse gesture | No | |
Console commands | No | |
Technical: | ||
Resolution | Up to 1920x1080@60Hz | |
Auto to get EDID | Yes | |
Data rate | 10.2 Gbps | |
OSD | No | |
Supported OS | Unix/Windows/Debian /Ubuntu /Fedora /Mac OS X/ Raspbian /Ubuntu for Raspberry Pi and other Linux based system | |
Console ports | Keyboard emulation | 1 * USB Type A |
Mouse emulation | 1 * USB Type A | |
USB 2.0 Hub ports | 1* USB Type A | |
Video /Audio | 1 * VGA Type A | |
Cable version | 2*VGA (24 AWG), 2*USB Type A | |
ESD protection | Human body model - ±8kV (Air-gap discharge) | |
Mechanical: | ||
Chasing material | Aluminum Alloy | |
Product Dimensions | 91 (L) x 75 (W) x 13 (H) mm | |
Cable length | 1M | |
Item Weight | 500g | |
Contact
Supplier
