300KG Line-frequency cored lnduction furnace

The equipment is supported by a low center of gravity arc welded steel frame with sufficient span to ensure good stability of the equipment. The mass inertia of equipment motion will affect the stability of equipment.In order to avoid the movement of the equipment caused by the unexpected vibration, the equipment is provided with bolt holes for fixing the equipment.

All components and fittings are dimensioned to allow for erosion and wear, providing sufficient strength for normal operation of the equipment.

The three-phase power line drawn by the power grid leads to the switch through the special channel in the electric control cabinet, and the terminal of the power line is equipped with a special plastic protective cover.Any live wires and terminals carry a clear warning sign.All components in the electronic control cabinet adopt the protection standard of IP20.There are a series of special grounding terminals near all the group wires in the electric control cabinet. Each grounding terminal is connected to the same ground wire. The color of all the connecting wires in the electric control cabinet conforms to the provisions of current laws.All terminals are the same standard and the same Fixed mode.All motors are designed with special magnetothermal elements for over-current and overload protection.The main coil of transformer is also overload protected by special magnetic heating element.Internal electronic components with self - overload protection measures.Electrical hazards can be completely eliminated if routine maintenance and use are carried out in strict accordance with the instructions.

The device is driven by a motor driven hydraulic pump, with the oil pressure within the range sufficient to drive the device.There is no danger other than the action caused by the hydraulic cylinder drive. No oil pressure or voltage accumulator;
The dimensions of the rigid and flexible tubing are large enough to withstand the expected maximum oil pressure, and all tubing is fastened to the rack or tightly bundled with self-locking nylon ties to prevent accidental sudden stretching and to hold the flexible tubing in place against wear on moving parts.In any case, a ruptured tubing would not be harmful because of the low pressure and temperature of the oil circulating in the system.