Function: The connection of Positive and negative cable fault, then enter automatic protection status: blown fuse
12V 24V 30A solar charge controller
CM-3024 controller is a kind of intelligent,multi-purpose solar charge and discharge controller. The family use the fixed LCD display, with a very friendly interface; various control parameters can be flexibly set, fully meet your various application requirements.
1.Reverse polarity protection
2.short-circuit protection
3.Over-current protection
4.Open-circuit protection
5.Over-charge protection
6.Over-discharge protection
7.Over temperature protection
Function: The connection of Positive and negative cable fault, then enter automatic protection status: blown fuse
Function: automatic protection status when short circuit stop working
Function: over current then enter automatic protection status: auto stop
Faction: over discharge then enter automatic protection status: auto stop
◪Charge and discharge with adjustable parameters
◪positive to positive
◪negative to negative
◪positive to positive
◪negative to negative
◪positive to positive
◪negative to negative
Model | CM3024 | CM3024 A | |
Rated current | 30A | 30A | |
Rated voltage | 12V/24V | 12V/24V | |
open circuit voltage of solar panel | <50V | ||
Low voltage disconnection(LVD) | 10.7V / 21.4V | ||
Float voltage | 13.7V / 37.4V | ||
Low voltage reconnection(LVR) | 12.6V / 25.2V | ||
No load loss | <=30mA | ||
Loop voltage drop | <=170mV | ||
Charging mode | PWM mode | ||
temperature compensation | -4mV/cell/℃ | ||
With current show | no | yes |
Contact
Supplier