4040 FRP reverse osmosis membrane housing water treatment

Product features:

I. Excellent and reliable internal quality

The product adopts microcomputer control automatic pouring molding, the main 

material is epoxy resin and fiber material through special process treatment, so

 that the finished product in the degree of pressure resistance, temperature 

resistance, corrosion resistance of ordinary steel, plastic and other materials

 can not be compared to the advantages.

Second, excellent insulation performance

Glass reinforced plastic membrane shell. At room temperature, the thermal 

conductivity is generally within the range of 0.15 -- 1.36W (M.K), only about 

1/200. Its thermal insulation performance is incomparable to metal materials.

 This feature is of great benefit to the reverse osmosis membrane in the 

membrane shell, and plays a role in which the external temperature has

 little influence on the membrane.

Three, outstanding corrosion resistance performance

The combination ratio of glass fiber and epoxy resin has been specially cured

 to form a natural anti-corrosion product. The inner surface is smooth and the

 coating has good stability to the solvent such as acid, alkali, salt and oil with 

low concentration. So that the seawater into the shell, such as microorganisms

 are effectively inhibited. Long-term use without corrosion.

Iv. Structural design

The barrel body, the head and the grooves of the membrane shell are carefully

 designed and optimized to ensure the safety of the structure and the stability 

of the structure under long-term pressure.

The concentrated water side openings are optimized to meet the necessary 

safety pressure of four side openings in one head and to enhance the variability 

during installation.

Reliability of components

The end plate is an important component of the membrane shell assembly. 

The end plate of the company is made of fiber-reinforced molding compound 

with high strength, high pressure resistance and high pressure impact resistance.

Seal design "V+X" ring is professionally designed with O-type end plate seal ring 

to ensure that it is watertight in low temperature and high temperature range.

The sealing design of the side opening is a combination of L-shaped drum pads,

 which ensures the side opening mouth to have a better sealing effect in the case 

of Angle deviation.