40W 24VDC 1.7A*1ch CV 1-10V Driver
- Model: IP1H24V-40A-1
- Input Voltage: 220-240VAC
- Output Power: 40W
- Output Voltage: 24VDC
- Output Current: 1.7A
- Channels: 1
40W 24VDC 1-10V Constant Voltage Driver IP1H24V-40A-1
IP1H24V-40A-1 is a constant voltage mode output LED driver. This driver can be controlled by externalsignal (1-10V active signal, adjustable resistance and PWM signal) to achieve a smooth dimming effect.
Feature
1. Single channel constant voltage output,1.7A Max
2. Support 3-in-1 dimming mode(1-10V active signal, adjustable resistance, PWM)
3. Built-in active PFC function
4. Dimming range of 0-100%, and dimming effect smooth, no flicker
5. 100% output when no dimming signal input, can be used as normal power supply
6. Over load protection; Over temperature protection; Short circuit protection
7. Suitable for indoor LED lighting application, such as LED strips, spot light，wall washer,and so on
Technical Parameter
Model | IP1H24V-40A-1 | |
Output | DC Voltage | 24VDC |
Current | 1.7A/CH | |
Rated Power | 40.8W | |
Voltage Tolerance | ±3% | |
R & N(max) | 400mVp-p | |
Channels | 1 | |
Input | Voltage Range | 220 – 240VAC |
Frequency Range | 50/60Hz | |
Efficiency | ＞88%@230VAC,full load | |
Power Factor | ＞0.95@230VAC,full load | |
THD | ＜10%@230VAC,full load | |
Current | 0.23Amax@230VAC | |
Inrush current | Cold start, 30A(twidth=650us measured at 50% Ipeak) @230VAC | |
Protection | Over load | Hiccup, recovers after fault condition is removed |
Over temperature | Shut down the output, recoverautomatically when temp. back to normal | |
Short circuit | Hiccup, recovers after fault condition is removed | |
Function | Dimming | 1-10V/ Adjustable resistance /PWM |
Others | Dimension | 137 (L)*82(W)*31(H)mm |
G.W.(g) | 225g | |
Working Temp. | -20 ~ 50℃ | |
Relative humidity | 20~90% RH | |
Contact
Supplier
