4X2 Dual Monitor KVM (HDMI+VGA)
◪ Using only 1 set of keyboard, mouse and 2 monitors to control 2computers
◪ Support Unix/Windows/Debian/Ubuntu/Fedora/Mac OSX/Raspbian/Ubuntu for Raspberry Pi and other Linux basicsystem
◪ Support resolution up to 3840*21 60@60HZ
◪ Support hot plug, disconnect or connect devices to the KVM atany time without turning off PC :
◪ With EDID emulators in each input port , keep PCs always havecorrect information , prevent displays setting change whileswitching input ports
◪ Support keyboard hotkeys , IR remote control and front panelbutton to control KVM
◪ Available to use keyboard and mouse without any delay afterswitching input sources
◪ With extra USB 2.0 port, it is possible to connect bar codescanner, USB hard drive or other USB device
◪ Support keyboard and mouse pass through mode to improveKVM compatibility
HKV0402A1U | 4X2 Dual Monitor KVM (HDMI+VGA) | |
Functionality: | ||
Auto Scan | Yes | |
Port selection | Front panel buttons | Yes |
Keyboard hotkeys | Yes | |
IR remote control | Yes | |
Mouse gesture | No | |
Console commands | No | |
Technical: | ||
Resolution | Up to 3840x2160@60Hz | |
Auto to get EDID | Yes | |
Data rate | 18 Gbps | |
Auto scan interval | 5~250 Seconds | |
Beep Sound | On/Off | |
OSD | No | |
Supported OS | Unix/Windows/Debian /Ubuntu /Fedora /Mac OS X/ Raspbian /Ubuntu for Raspberry Pi and other Linux based systems | |
Console ports | Keyboard emulation | 1 * USB Type A |
Mouse emulation | 1 * USB Type A | |
USB 2.0 Hub ports | 1 * USB Type A | |
Video /Audio | 2 * HDMI Type A | |
RS232 | NA | |
LAN | NA | |
System ports | USB Data | 2 * USB Type B |
Video / Audio | 2 * HDMI Type A 2* VGA Type A | |
ESD protection | Human body model - ±8kV (Air-gap discharge) | |
Mechanical: | ||
Chasing material | Aluminum Alloy | |
Product Dimensions | 300 (L) x 117.5 (W) x 30.5 (H) mm | |
Item Weight | 800g | |
Contact
Supplier
