steel wire brush machine is a 5 axis drilling and filling machine special for steel wire brush, it works the steel wire by coil, the machine cut the steel wire by itself, The operator manually loads the virgin blocks onto the machine and enables the working cycle. When the cycle is over, the operator removes the filled block and then moves the drilled block from the drilling station to the filling station, and places a virgin block into the drilling station, during the operating, the machine no need to stop, it would run automatic.
◪ Full automatic, no need to stop the machine even changing the virgin blocks.
◪ Working the steel wire by coil, the machine cut the steel wire by itself.
◪ easy to change design.
Axis | 4-7 axis |
Function | Drilling & Filling |
Filling mode | Staples mode |
Standard Working Area | X*Y = 500mm*200mm |
Material of filaments | Steel wire |
Maximum length(standard) | 90mm |
Diameter of wire | 0.3-0.6mm |
Quantity of wire per hole | Less than 12 pieces |
Diameter of holes | 3mm-4mm |
Production speed | 150-180 holes/minute |
Material of brush blocks | Plastic, wooden |
Motor | Servo motors |
Quantity of designs | Maximum 36000 holes |
Gross Weight | Around 1500KGS |
Power Supply | Three phase 380V, 50-60HZ |
Power consumption (kW) | 3.5 |
Dimensions of machine (l x p x h, mm) | 2200 * 3500 * 2150 |
Dimensions of power box (l x p x h, mm) | 580 * 660 * 1500 |
Contact
Supplier
Agriculture Machinery & Equipment
Apparel & Textile Machinery
Building Material Machinery
Chemical Machinery & Equipment
Energy & Mineral Equipment
Engineering & Construction Machinery
Food & Beverage Machinery
Home Product Making Machinery
Industry Laser Equipment
Machine Tool Equipment
Metal & Metallurgy Machinery
Packaging Machine
Paper Production Machinery
Plastic & Rubber Machinery
Printing Machine
Refrigeration & Heat Exchange Equipment
Woodworking Machinery
Environmental Machinery
Machinery Accessories
Material Handling Equipment
Welding Equipment
Cleaning Equipments
Commercial Machinery
Air-Compressors & Parts