Magnesium is the main alloying element in the 5052 alloy aluminum plate. It is the most widely used rust-proof aluminum. The alloy has high strength, especially fatigue resistance: high plasticity and corrosion resistance, no heat treatment strengthening, semi-cold It has good plasticity during hardening, low plasticity during cold work hardening, good corrosion resistance, good weldability, poor machinability and polishing.
Tempering | O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34H36,H38,H111,H112,H114,H 116,H321 |
Surface | mill,bright,polished,hair line,brush,sand blast,checkered,embossed,etching,etc |
Thickness | 0.15-500mm |
Width | 20-1300mm |
Length | 500-6000mm or above |
Thickness tolerance | + 0.05mm |
Width / length tolerance | + 2mm |
Minimum quantity | 5-10 tons |
Grade | Chemical Composition(%) | Others | AI | ||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Single | Tol | 99.5 |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 0.03 | - | 99.6 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 0.03 | - | 99.7 |
1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | 0.04 | 0.03 | 0.03 | - | 99 |
1100 | 0.95 | 0.05~0.4 | 0.05 | - | - | 0.1 | - | 0.05 | 0.15 | Remains | |
3003 | 0.6 | 0.7 | 0.05~0.2 | 1.0~1.5 | - | - | 0.1 | - | 0.05 | 0.15 | Remains |
3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8 | - | 0.25 | - | 0.05 | 0.15 | Remains |
3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.2~0.6 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | Remains |
3105 | 0.6 | 0.7 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | 0.1 | 0.05 | 0.15 | Remains |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | 0.1 | - | 0.05 | 0.15 | Remains |
5083 | 0.4 | 0.4 | 0.1 | 0.4~0.1 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Remains |
5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6~3.6 | 0.3 | 0.2 | 0.15 | 0.05 | 0.15 | Remains |
5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5~1.1 | 0.1 | 0.25 | - | 0.05 | 0.15 | Remains |
5086 | 0.4 | 0.5 | 0.1 | 0.2~0.7 | 3.5~4.5 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Remains |
6063 | 0.2~0.6 | 0.35 | 0.1 | 0.1 | 0.45~0.9 | 0.1 | 0.1 | 0.1 | 0.05 | 0.15 | Remains |
6041 | 0.4~0.8 | 0.7 | 0.15~0.4 | 0.15 | 0.04~0.35 | 0.04~0.35 | 0.25 | 0.15 | 0.05 | 0.15 | Remains |
5052 alloy aluminum plate is widely used in the manufacture of fuel tanks, oil pipes and transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, molds, etc. It can also be used for low load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lube oil conduits, various liquid containers and other small load parts made with deep drawing: Wire is used to make rivets.
Contact
Supplier