wholesale at solar street light cost SLD-SL-312 12W all in one solar street light
It will not be a contravariant trend that we make use of the solar energy to light up the solar led street light.With the shortage of oil energy and coal energy, solar energy becomes more and more important. Aiming at the market of solar lights, the integrated solar street light have a very brilliant future,as its advantages. Especially in some remote areas where lack of AC power, our integrated solar street lights have a very potential market.
12W all in one solar street light is a kind of low power solar light,the cost is lower than other model, it suitable for gardens,parts,backyards and so on.It's very energy saving and environment friendly.Enjoy the green light,from using integrated solar street light.
Product Data |
SLD-SL-312 12W All In One Solar Street Light
Specification | ||
Light Source | 12W Bright LED Chip | |
PV Power | 18V 25W Mono solar cells | |
Battery | 12V 12Ah (LiFePO4) | |
Human Body Sensing | yes | |
Overload Protection | yes | |
Luminous | All Bright | 1350-1500lm |
Energy Saving | 450-500lm | |
Viewing Angle | 120° | |
Color Temperature | 3000-3500k/6000-6500k | |
Charge time | 7-8H | |
Working Time | | ≥10hrs |
Dim mode | ≥24 hrs | |
Working temperature | Charging temperature | -20℃~+60℃ |
Discharging temperature | -20℃~+60℃ | |
Storage temperature | -20℃~+45℃ | |
Degree of protection | IP65 | |
The installation of a height range is recommended | 3-4m | |
The distance of installation | 15m to 25m | |
Product size/Packing size | 795*280*43mm/ 860*345*210mm(1pcs) | |
Net Weight/Gross Weight | 8.5kg/9.5kg | |
Packing quantity | 1set/carton | |
Loading Quantity | 350sets/20GP 700sets/40GP |
Product Details |
①Solar Panel
The solar panel we used for SMD solar street light all in one is improted from American,very high efficency and environment friendly.Solar panel turns the solar energy into DC electricity in battery during the day time,and when the night comes,the battery will light up the lamps.
②Lithium Iron Battery
We use lithium iron battery for our SMD integrated solar street lgiht,it has advantages of smallest size,like the cell phone's battery,most high efficency and long life span.
③INFRARED BODY SENSOR
The light can work full automatically controlled by the infrared body sensor.It would be on full energy mode when people pass throught and on energy saving mode when they walked away.
④MPPT Controller
The multifunctional controller, can be set up.And it has circuit protection,like overcharge, discharge, short circuit, open load, lightning protection and other functions for all our solar lights.
Our new solar led street light with integration design, easy to carry, put solar panel, LED lamp, battery and controller all in one, don't need any cable. Installation is very convenient, use iron pole, wood pole, bamboo pole, plastic pole, wall, etc will be no problem.Compare with the other solar light it will can reduce a lot of cost.
Working Mode |
The solar panel converts sunlight into electricity and stored in Li-Fe battery via controller.The COB LED light will work at night automatically under the light sensor control,and provide light for different areas.The LED light will be at saving energy mode(about 30% of full power) normally when there is no motion.However,it will be switched to full power mode when PIR sensor detects motion.The full power mode will last about 30s ,and after 30s it will be switch back to saving power mode until new motion detected.It can be also pre-programmed by time schedule without motion sensor as well.That would the be firt one hour at 30% illumination,second 4 hours at full brightness,and the rest hours(befor the sun rise) at 30% illumination.
How to install 12w all in one solar street light?
Install fuse first if present before use (remove any film under fuse)/Or to turn on the switch on the fixture.
Tool supplied to tighten security bolts provided
Face solar panel as much towards the north as possible to maximize sun exposure (and therefore battery charge.)
The trees around the solar lamps shall not affect the lighting of the lamps, otherwise, prune the trees.
It is strongly recommended not to set high and large shelters in front of lamps to avoid the sunlight.
Applications |
Our integrated solar street light:
•Patent pending integrated design.
•Solar powered outdoor lighting.
•Easy installation. No cable needed.
•Using LifePO4 battery to prolong product life and protect environment.
•Light output can be adjusted automatically by a built-in infrared sensor, pedestrians closing light working bright model, after leaving from the effective sensor area, bright model will last for one minute, and then become dim model.
•Modularity design. Easy assemble and maintenance.
•Compact volume and light weight design saves freight cost and installation cost
•Rust-proof, dustproof and waterproof.
•Safety and reliability.
Contact
Supplier