inflatable display flag introduction:
size | color | weight | inflation time | production time | packing | shipping time | |||
6m | standard or customized | 5kg | 3 mins | 7 days | 25X23X20cm | 3~5 days | |||
8m | 7kg | 5 mins | 7 days | 30X30X20cm | |||||
10m | 9kg | 7 mins | 7 days | 35X35X20cm |
There are three heights, 6 meters, 8 meters, 10 meters
Two kinds of flag surface, single-sided printing flag surface, double-sided printing flag surface.
Flagpole: Stock color flagpole, such as black, white, red, blue and gray
Printing flagpoles, monochrome printing specified by the customer, too complex colors cannot accept printing
The base, generally a water bag, is used to add weight to the flag. If the customer has special requirements or has its own better weighting method, it is not necessary to choose the base.
Accessories: Usually ropes and ground nails, but because there is a water bag, the ground nail can only be fixed on the water bag.
Electric pump: The voltage of each country is different. The salesman will prompt which voltage electric pump to choose from different countries. The electric pump can be used to inflate or deflate, which can save installation and packing time.
The printing method is generally thermal transfer. If it is single-sided printing, it is very simple. One side is printed and the other side is not printed. If it is double-sided
printing, an extra layer of shading cloth will be added in the middle to prevent the printing on both sides from affecting the appearance.
Inflation time for display banner: Generally 3~5 minutes, find the position of the air nozzle and connect the electric pump.
TPU patch: If the inflatable flagpole is leaking, you can use the TPU patch to repair it, tear off the paper, and paste it on.
Contact
Supplier