Absolute High Temp HEPA Filter
absolute high temp hEPA filter
Specifications:
Application: Protection for clean processes at high temperature
Frame: Reinforced stainless steel
Media: Glass Fiber
Max Temperature: 350ºC
Relative Humidity: 100%
Separator: Aluminium
Gasket : Glass fiber
Sealant: Ceramic
Max Final Pressure Drop: 500Pa
Comment:
Please note installation and assembly instructions! Due to the different thermal expansion
efficient of the individual filter components the ceramic potting may form cracks during
the tempering process. At operating temperature (350 ºC) these filters have an overall efficiency
of 99,97% at 0,3 μm, leackages are possible.
Products Parameter：
Dimension (mm) (W*H*D) | Rate Air Flow (m3/h) | Media Area (m2) | Dust Holding (g) | Rate primary Resistance (Pa) | Finally Resistance (Pa) |
484X484X120 | 450 | 4.4 | 230 |
H12<200Pa H13 :<210Pa |
400-600pa |
610X610X120 | 700 | 7.1 | 370 | ||
610X915X120 | 1050 | 10.6 | 560 | ||
610X1220X120 | 1400 | 14.1 | 740 | ||
484X484X150 | 600 | 6.0 | 320 | ||
610X610X150 | 1000 | 9.7 | 510 | ||
610X915X150 | 1500 | 14.5 | 770 | ||
610X1220X150 | 2000 | 19.3 | 1020 | ||
484X484X220 | 1000 | 9.8 | 600 | ||
610X610X220 | 1600 | 15.8 | 920 | ||
610X915X220 | 2300 | 23.7 | 1340 | ||
610X1220X220 | 3000 | 31.6 | 1750 |
Characteristics:
The only high-temperature HEPA filter that can comply with the most stringent FDA GMP requirements.
Pretreated, and prequalified, during the manufacturing process, with an exclusive heat preparation cycle (572º F, 300º C).
Stainless steel face grid is installed on both the air entering and air exiting sides of the filter to ensure protection of the media pack and add to the filter pack’s structural integrity.
Contact
Supplier
