ADSS best outdoor fiber cable

ADSS cable

ADSS cable is loose tube stranded. Fibers, 250μm , are positioned into a loose tube made of high modulus plastics. The tubes are filled with a water-resistant filling compound. The tubes (and fillers) are stranded around a FRP (Fiber Reinforced Plastic) as a non-metallic central strength member into a compact and circular cable core. After the cable core is filled with filling compound. It is covered with stranded layer of aramid yarns and then the cable is completed with PE outer sheath.

The actual status of overhead power lines is taken into full consideration when ADSS cable is being designed. For overhead power lines under 110kV, PE outer sheath is applied. FOR power lines equal to or over 110kV, AT outer sheath is applied. The dedicate design of aramid quantity and stranding process can satisfy the demand on various spans.

Applications:

Outdoor aerial applications

Low voltage transmission system(≤12 kV)

Railway & Telecommunication pole route

Subscriber & Local Area Network

Voice, data, video & imaging system

Features:

Can be installed without shutting off the power

Excellent AT performance. The maximum inductive at the operating point of AT sheath can reach 25kV

Light weight and small diameter reducing the load caused by ice and wind and the load on towers and upholder

Large span lengths and the largest span is over 1000m

Good performance of tensile strength and temperature

The design life span is 30 years

Optical Characteristics：

Technical Parameters：