Operation:
1. Connecting powder case to handpiece Hose 4-Hole, or 2-Hole type Powder Case Connect the poder case directly to the corresponding handpiece hose.
2. Mounting nozzle to Powder Case
Slide back the hadpiece release ring on the powder case joint and hold. Insert the nozzle into the powder case joint, and release the ring.
3. Filling Cleaning Powder
Unscrew the powder case cap and remove. Break a seal of the cleaning powder pack, and fill whole pack of powder case. Recap the powder case cap securely.
4. Jetting Powder
Aim the nozzle at the cuspidor, and jet for 3 seconds to verify that the powderjets uniformly. And use on the patient. Use with the nozzle 5-10 mm.
