The full cover is also called straight bending and strai ght arms.
No matter how your door overlay are,AOSITE hinges series always can provides reasonable solutions for each application.
Model B03 belong to without hydraulic hinge,so it can’t solf closing ,but this type is two ways and slide on hinge .Our standars Includes hinges, mounting plates,.Screws and decorative cover caps are sold separately.
The full cover is also called straight bending and strai ght arms.
The cover is suitable for the cabinet body which cover s the side panels.
The cupboard door covers the side plate, half of which has doors on both sides of the cabinet.
45mm Hole distance
45mm Hole distance is the most common hinge cup pattern for European style hinges.Almost all of the major Hinge manufacturers selling European style hinges including Blum, Salice, and Grass are with this hinge cup pattern.Diameter of the hinge cup or "boss" that inserts into the cabinet door is 35mm.Distance between screw holes (or dowels) is 45mm.Center of screws (dowels) is 9.5mm offset from the hinge cup center.
48mm Hole distance
48mm Hole distance is the most common hinge cup pattern used by Chinese (imported) cabinet makers. This is also a common universal standard for other major Hinge manufacturers in areas outside North America, including Blum, Salice, and Grass. These will be very difficult to source as replacements in North America. It is recommended to switch to a more commonly available cup type in that case.Diameter of the hinge cup or "boss" that inserts into the cabinet door is 35mm. Distance between screw holes (or dowels) is 48mm.Center of screws (dowels) is 6mm offset from the hinge cup center.
52mm Hole distance
52mm Hole distance is a less common hinge cup pattern used by some cabinet makers,but it’s most popular in Korea market.This pattern is mainly for compatibility with some European hinge brands like Hettich and Mepla. Diameter of the hinge cup or "boss" that inserts into the cabinet door is 35mm.Distance between screw holes /dowels is 52mm. Center of screws (dowels) is 5.5mm offset from the hinge cup center.
Contact
Supplier