Juncheng Ceramic Wall Tile are made by high quality kaolin fired under high temperature and pressure with low water absorption and high strength.Because of colourful pattern designs and strong pollution resistance, Juncheng Ceramic’s wall tiles are widely applied to wall and floor of large project all around the world.
Juncheng Standard Compare With International Standard And China Standard
Test Item | International Standard | China Standard | Juncheng Standard |
EN159-84(BⅢ8546;) | GB/T1400.5-2006 | Q/SH01-2006 | |
Edge straight degree(%) | ±0.3 | ±0.2 | ±0.1 |
Straight Angle(%) | ±0.5 | ±0.3 | ±0.2 |
Surface quality | ≥95% | At least 95% of the brick is apart from the 0.8 m vertical observation of surface defects in the distance | At least 96% of the brick is apart from the 0.8 m vertical observation of surface defects in the distance |
Water absorption(%) | More than 10% on average, if the value is greater than 10% factory shall be indicated | 10<E≤20 on average,the single value not less than 9 | 10<E≤18 on average,a single value not less than 9 |
Fracture strength(N) | The average is not less than 600 | The average is not less than 650 | |
Rupture modulus(Mpa) | Rupture modulus when thickness > 7.5, an average of 12 thickness, according to the EN100 definitions | The average is not less than 15,the single value not less than 12 | The average is not less than 18,the single value not less than 16 |
Thermal shock resistance | According to the request | Through 10 times thermal shock resistance test is not appear rupture or crack | Through 10 times thermal shock resistance test is not appear rupture or crack |
The glaze cracking resistance | According to the request | After the glaze crack resistance test, glaze should be no crack or flake | After the glaze crack resistance test, glaze should be no crack or flake |
Household chemical reagent resistance | Not less than B | Not less than GB | Not less than GA |
To bear or endure dirty | Not less than 2 | Not less than 3 | Not less than 5 |
Acid resistance | According to the request | 3% HCL solution leaching after 4d | not less than GLA |
Alkali resistance | According to the request | 30g/LKOH solution leaching after 4d,grading test | not less than GLA |
The inner quality standard of Juncheng Ceramics is much higher than international standard.Thus the quality of Juncheng Ceramis is guaranteed.
Performance And Characteristics:
1.Secondary Firing: Product quality is better than a burning, stable quality.
2.Completely Waterproof Technology:
Pioneered in completely waterproof technology in the industry.Paving bricks effectively put an end to the product of the secondary color difference phenomenon. With general ceramics difference: After tile biscuit firing molding, between brick and glaze with a AC waterproof layer of impermeable material completely.Effective fill the tile surface of wool stoma, and form a layer of protective film. Prevent absorption after ceramic tile in the shop is stuck, cement and brick wall with color in the water and affect surface effect, To prevent the secondary color.
Product Specification&Packing Details:
SIZE(MM) | THICKNESS | PCS/BOX | SQM/BOX | KG/BOX | CTNS/PLTS | CTNS/CONT | SQM/CONT | KG/CONT |
300X300 | 9.8 | 15 | 1.35 | 23 | 66 or 44 | 1100 | 1485.00 | 25300 |
330X330 | 9.8 | 12 | 1.3068 | 22 | 54 | 1080 | 1411.34 | 23760 |
300X450 | 9.5 | 10 | 1.35 | 22 | 60 or 48 | 1080 | 1458.00 | 23760 |
240X660 | 9.8 | 9 | 1.4256 | 25 | 48 | 960 | 1368.58 | 24000 |
300X600 | 9.8 | 8 | 1.44 | 26.5 | 48 | 960 | 1382.4 | 25440 |
400X800 | 10 | 6 | 1.92 | 39 | 24 | 480 | 921.6 | 18720 |
Contact
Supplier