Advantage :
This product comes with lens optical modules which is taking LED cold light source as the light emitting element, mainly develop for replacing xenon lamp lens modules in the market, the adavatages are in the following:
1,Single module is able to achieve switching between the high beam and low beam ;
2,Compared with the traditional headlights, its low beam is gaining a wider and more uniform at shooting range, the width of 5lux illumination projecting on the road is able to reach 60m, the strongest illumination projecting position falls at 8 ~ 10m ahead of the car , quite a confortable vision to drive ; high beam illumination projecting tested in the darkroom at 25m distance is able to reach 60lux above, and the length of 5lux illumination projecting on the road can extend to 150m, of which lighting effects is as great as the xenon lamps installed in the middle and high class car in current markets.
3,Low cost, and with the continuous improvement of LED performance , its competitive advantages will become more prominent ;
4,Shape and structure are almost the same as xenon projector lens , so much convenient for modification and replacement ;
5, LED light source enjoys a long-lifespan ,which is also stable and reliable at performance , saving customers’ after sales cost .
( Note: The above optical parameters are for reference only , the actual product might be a little bit different due to design updates, different batches and other factors. The test results will be subject to the actual factory’s product, please understand!)
High Beam
Low Beam
Operating Conditions:
1,Operating temp:-40℃~85℃
2,Waterproof requirements: it is forbidden for any water or mist spray into the models, or it's easy to cause short circuit
3,Cooling requirements: please ensure well ventilated, and no obstructions in the range of 15mm under the radiator fan , or the light source will be burned because of the poor heat radition.
Precautions:
1,Do not stare at the light source and the front of the lens too close when lighting,otherwise,it's easy to hurt your eyes.
2,Do not tough the radiator after lighting to avoid empyrosis.The temperature of the radiator can reach to 85℃ when the environment temperature comes to 65 ℃.
3,Do not touch the light source of the lens and the reflectors, that will damage the light source and affect the lighting working in proper way.
4,After lens modules installed in the headlight, please check whether the fan is in normal operation or not, if not,please stop using, or it will be burned due to the poor radiating .
5,Keep the lens modules work under 50 ℃environment, to ensure it can provide enough brightness and reach longer service life.
Contact
Supplier
