CNC MACHINING CENTER SNK-V6

Brand:

snk cnc

Model:

snk-v6

MOQ:

1 set

Payment:

t/t,l/c

Delivery time:

7 working days

Brand:

snk cnc

Model:

snk-v6

MOQ:

1 set

*Send an Inquiry to this supplier

Supplier Info.

Company Name： Dongguan SNK CNC Technology Co.,LTD

Registration Date： 2000

Country / Region： guangdong / China

City： dong guan

Main Products： cnc lathe machine, cnc machining center manufacturers, cnc lathe machining center

Product Detail

High speed and high precision maching center

The ingenious design of bed structure can with stand the interia generated by high gravity load, firm as a rock and steady as Mount Tai. It can enhance effciency and reduce tool wear with the excellent rigidity of short nose spindle.

Three axis fast displacement can greatly reduce vibration of cutting and shorten processing time. Superior stability tool change can greatly reduce non processing time.

Using the back chip stucture to clean up the scraps greatly and do not leak oil easily.

The highly rigid bobbin supports three axis making the speed faster and accurate higher.

A non mechanical failure stop page of cutter can be restore to the original position with one key, so that improving the production efficiency.

It can decrease the probability of dysfunction to avoid hitting the cutter by the tool library dysfuction detection system.

The cutting wheel feed mode achieved the apprentice operate the machine without the risk of collision.

PRODUCT PARAMETERS

SNK CNC

1.SPECIFICATION

ITEM			UNIT	SPECIFICTION
WORKING TABLE	WORKING TABLE SIZE		mm	800*420
	T-SLOT（NUMBER-SIZE*DISTANCE）		mm	3-18*125
	SPINDLE SURFACE DISTANCE BETEEN WORKING TABLE		mm	150-600
	WORKING TABLE BEAR		kg	350
SPINDLE	CONICAL PASS TYPE, INSTALL SIZE		---	BT40
	SPEED		rpm	12000
	DIAMETER		mm	486
TRAVEL	X-AXIS		mm	600
	Y-AXIS		mm	400
	Z-AXIS		mm	450
FAST MOVING SPEED	X-AXIS		m/min	48
	Y-AXIS		m/min	48
	ZAXIS		m/min	48
SCREW MODEL	X-SCREW MODEL		---	3216
	Y-SCREW MODEL		---	3216
	Z-SCREW MODEL		---	3216
LINEAR GUIDEWAY	X-LINEAR GUIDEWAY		---	RGW35HC
	Y-LINEAR GUIDEWAY		---	RGW35HC
	Z-LINEAR GUIDEWAY		---	RGW35HA
SPINDLE MOTOR	MOTO TYPE			FANUC BII18/12000
	MAXIMUM SPEED			12000
	RATED POWER			7.5KW
	CONNECTION WAY BETWEEN SPINDLE AND MOTOR			DIRECT CONNECTION
FEEDING MOTOR	X-AXIS	MOTO TYPE	---	FANUC BIS12/3000
		MAXIMUM SPEED	r/min	3000
		RATED POWER	KW	2.0
	Y-AXIS	MOTOR TYPE	---	FANUC BIS12/3000
		MAXIMUM SPEED	r/min	3000
		RATED POWER	KW	2.0
	Z-AXIS	MOTO TYPE	---	FANUC BIS12/300
		MAXIMUM SPEED	r/min	3000
		RATED POWER	KW	3.0
CUTTING FEED SPEED RANGE X/Y/Z-AXIS			mm/min	0-12000
AUTOMATIC TOOL CONVERSION DEVISE	STANDARD DEVISE		UNIT	24
	SHANK TYPE/ CONICAL DEGREE		---	BT40

	MAXIMUM TOOL WEIGHT	kg
	TOOL SELECTION MODE	---	EXCHANGE
CASTING SIZE	LENGTH	mm	1950
	WIDE	mm	2600
	HIGH	mm	2400
CASTING WEIGHT	NET WEIGHT	Kg	4500
GENERRAL POWER	VOLTAGE/FREQUENCY	V/Hz	AC380/50
	VOLTAGE FLUCTUATION RANGE	---	20%
	TOTAL CAPACITY OF POWER SUPPLY	KVA	14.5

2.MACHINE TOOL ACCURACY STANDARD

INSPETION ITEM		DEMAND
POSITIONING ACCURCY	X-AXIS	JIS±0.005/300
	Y-AXIS	JIS±0.005/300
	Z-AXIS	JIS±0.005/300
REPEAT POSITIONING ACCURACY	X-AXIS	JIS±0.005/300
	Y-AXIS	JIS±0.005/300
	Z-AXIS	JIS±0.005/300
CINNECTION MODE OF THREE-AXIS MOTOR	X/Y/Z	ER32 ELECTICAL SPINDLE

3.MACHINE SPECIFICATION

NAME	SPECIFICATION TYPE	BRAND
CONTROL SYSTEM		JAPAN/ FANUC OI-MF
SPINDLE	BT40	CHINA
X-SCREW	3216	TAIWAN HIWIN / PMI
Y-SCREW	3216	TAIWAN HIWIN / PMI
Z-SCREW	3216	TAIWAN HIWIN / PMI
X/Y-AXIS TRACK	RGW35HC	TAIWAN HIWIN / PMI
Z-AXIS TRACK	RGW35HA	TAIWAN HIWIN / PMI
BEARING	NSK SPECIAL BEARING	JAPAN THT
SPINDLE COOLING SYSTEM	QG-02LY-1P	CHINA
LUBRICATING DEVICE	ELECTRIC LUBRICATING PUMP	CHINA
ELECTRICAL CABINET COOLING SYSTEM	HEAT EXCHANGE	CHINA
GENERAL ELECTRICAL COMPONNENTS	ELECTIC RELAY; CONTACT; ELECTRONIC MANETIC VALVE; SWITCH	SCHNEIDER
TOOL
MOBILE ELECTRONIC HAND PLUSE	1225	CHINA
COOLING PUMP	750W	CHNA
PROTECTION	FULL CLOSURE	CHINA

4.MACHINE ACCESSORISE

NO	NAME	SPECIFICATION	QUANTITY	BRAND
01	WORKING LIGHT	LED220V-800MM-24W	1	CHINA
02	ADJUST THE SIZING BLOCK ADN SCREW	M30	6	CHIAN
03	TRANSPORT FIXING	M18	4	CHINA
04	ALARM	24V	1	CHINA
05	UNLOADING KNIFE SEAT	BT40
06	ELASTIC SHANK	BT40
07	CABLE NOZZLE	ER32	7	4.6.8.10.12.16.20
08	6 INCH BATCH	OPEN	1	NORMAL
09	PLATEN	M12	1	NORMAL
10	HARD DRIVER	2G	1	NORMAL

5.TECHNICAL SHEET

01	INSTRUCTION MANUAL（MACHANIAL PART）	1
02	SYSTEM INSTRUCTION MANUAL	1
03	PROGRAM INSTRUCTION MANUAL	1
04	MACHINE TOOL QUALIFICATION MANUAL	1
05	MACHINE TOOL PACKING LIST	1
06	TOOL INSTRUCTION MANUAL	1
07	LUBRICATING PUMP INSTRUCTION MANUAL	1

6.MAIN FUNCTION OF CONTROL SYSTEM

1	CONTROL SERVO SYSTEM: FANUC OI-MF	19	GRAPHIC DISPLAY(2D)
2	SIMULTANEOUS CONTROL SYSTEM : FANUC OI-MF	20	TOOL LENGTH AND RADIUS COMPENSATION
3	ENGLISH/ METRIC UNIT INPUT	21	TOOL MANAGERMENT
4	ABSOLUTE/ INCREMENT INSTRUCTION	22	64 SETS TOOL SPECIFICATION
5	MANU PROGRAM	23	REVERSE CLEARANCE COMPENSATION
6		24	SCREW PITCH ERROR CCOMPENSATION
7	LINEAR DIFFRENCE COMPENSATION	25
8	CIRCLE ARC DIFFERENCE COMPENSATION	26	SPINDLE STOP
9	POLAR DIFFERENCE COMPENSATION	27	WORK PIECE COORDINATE SYSTEM
10	HELIX COMPENSATION	28	6 SETS OF SETTABLE ZERO OFFSET
11	RIGID TAPPING	29	PROGRAMMABLE ZERO SHIFT
12	FRAME FUNCTION(MIRROR、SCALING AND ROTATION)	30	SUBROUTINE CALL
13	PROGRAM STORAGE CAPACITY：640M(256k Byte)	31	GRAPH CYCLE SUPPORT
14	BACKGROUD EDITOR	32	PROCESSING AREA RESTRICTIONS
15	MDA MODE	33	ACCELERATED MUTATION LIMIT
16		34	SPARE PART TIMER
17	8.4 " COLORFUL DISPLAY	35	HARD/SOFT LIMIT SWITCH
18	CHINESE/ ENGLISH DISPLAY	36

Contact

Supplier

Tell us your Buying Requirements