Model Number | YS-200035 |
Product Name | Custom Countertop Antique Necklace Display Stand Wholesale |
Dimensions | 1. General size: W150*D50*H250mm 2. The size of the necklace display stand can be customized according to the jewelry size and the amount of display required. |
Texture | 1. Steel wire: 3mm - 5mm diameter optional. 2. Wood: 15mm - 20mm thickness is optional. |
Surface Treatment | 1. Steel wire: powder coating or painting (If painting layer is too thin, easy to fade and black) 2. Wood: painting. Including varnish, hammer paint, orange paint, corrugated paint, flash paint, high gloss paint, flat paint, matte paint and wood wax. |
Assembly Structure | 1. Regular rectangular structure, disassembly can not save the packaging volume. 2. Screw fittings are needed for disassembly structure, and it will take 10 minutes to install, which will increase the cost. |
Services | 1. Free 3D sketch. 2. We can customize according to your requirements. |
1. Available types of metals
1) Steel wire: the surface can be powder coated or spray painted, suitable for low-end jewelry.
2) Stainless steel wire: the surface can be brushed, polished, sandblasted or electroplated, suitable for high-end jew.
2. Dividing column
1) 2 or 4 dividing columns can be added to the top of the display frame to make the position of ornaments more standard.
2) The dividing column shall be fixed by welding.
3. Size of display frame
1) Standard: length 120mm, height 225mm.
2) The display frame size can be customized according to the jewelry size.
1. Available types of wood
1) Solid wood: pine, oak, birch, camphor wood, etc., with the highest price. Among them pine is often used at display stands.
2) Plywood: medium price. If the edge of the base needs chamfering, the plywood is not suitable.
3) MDF: the price is relatively lowest. But light weight, easy to fall.
2. Edge chamfer
1) Edge chamfering width is 6mm, which can be changed to 3mm, 4mm, 5mm or 7mm as desired.
2) Edge chamfering can not only avoid sharp edges, but also improve aesthetics.
3. Logo can be added to the bottom surface in the following ways
1) Laser engraving logo: logo is recessed, color cannot be selected flexibly.
2) Silk-screen logo: flat logo with dumb color, which can be selected flexibly.
3) UV printing logo: three-dimensional glossy logo, color can also be selected flexibly.
1. Free 3D sketches and renderings.
2. 24-hour online service.
3. Communicated by phone and email, completes the design and quotation within 24 hours.
4. For face-to-face communication, sales staff, technicians and price checkers cooperate with each other to complete the design and quotation within 2 hours.
5. The delivery time of simple custom displays is within 7 days, and that of complex custom displays is 15 - 20 days.
Packaging specifications:
1. Independent inner box size: 270*170*50mm
2. One master carton contains 20 independent inner boxes.
Packaging Materials:
1. Plastic bags:
Thickness: 0.01mm-0.15mm (commonly used 0.03mm-0.05mm for display rack packaging plastic bags).
2. Bubble:
Conventional thickness of 30mm, or according to the need to choose 10mm, 20mm or more than 30mm, the recommended thickness is not more than 50mm.
3. Carton:
Number of carton layers: there are 3, 5 and 7 layers in general. It is recommended to use 5 layers for general export products and 7 layers for large and heavy products.
Contact
Supplier