Digital Inkjet/Laser decal paper for ceramic/glass/plastic

1. Choose photos level printing parameters, use a blow dryer after printing heating dry ink or dry naturally.

2. Spraying transparent cover coat on the surface pattern.

3. Use hair dryer drying or dry naturally.

4. Cutting(Note: Cut all round,otherwise part of the edge of the cover coat will stick the paper and it is difficult to demould.)

5. Put it in the water for 30 to 60 seconds to make paper and transfer printing film separation, sliding pattern (up).

6. Transfer printing design (as the picture 6, slowly pulled bottom paper, make the transfer printing film cling to the surfaces).

7. After carefully squeegee out the bubble (squeegee out the bubble with a business card after positioning), use the dry cloth or tissue lightly cleaning the surface and the water.

8. Put into the oven, baking temperature 100-120 degrees Celsius, 10 to 15 minutes.

Baking way:

Because the water transfer printing process involving widely many products and materials, different degree of heat resistance, operators need to practice, principle is the highest temperature of object itself which can bear, but the highest temperature should not exceed the packing instructions specified.

1. High temperature resistant material such as ceramic baking temperature 100-120 degrees,10 to 15 minutes.Due to metal‘s strong thermal conductivity,100 degrees Celsius baking is ok.Not high temperature resistant like plastic need to bake 50-70 degrees Celsius, for candles, flowers directly to dry.

2. The large goods which is not convenient to put in the oven,directly dry it naturally is ok, but it can not meet best adhesion.

Warm prompt: Low temperature drying most of the water, and then set to the specified temperature baking, or dry naturally,then baking, so that we can avoid to produce the bubbles.

The difference of transparent based and white based:

1.Transparent base: Colorless, transparent, suitable for glass, crystal, white or light color products, can show the objects own underpainting and shading, scope of application is the most broadest.

2.White based: Mainly for dark or black object, the purpose is to cover the product's underpainting and shading make more clear, make the designs clearer, such as glass, to make not transparent effect after water transfer printing .