Dirty Water as Submersible Pump (CE Approved)

Dirty Pump:
Condition of usage:
1. Maximum operating depth 5m below water level
2. The trans medium's temperature shouldn't be higher than 40C
3. Trans medium's pH: 4~10
4. Kinematics viscosity of the trans mediumis: 7X10-7~23X10-6m2/s
5. Density of the trans medium Limit: 1200kg/m3
Function and feature:
It can work safely and efficiently at high flux with the feature of complete heads. The design is designed to a wide tunnel which helps to convey the long fiber liquid or the solid whose diameter is about 15mm. The selection of bottom suction structure, stainless steel and special cast iron made the pump have the capabilities of complete drain and high resistance of abrasion and corrosion. The float switch can automatically control on and off with the change of the liquor level. The protector in the motor can automatically cut off power when it overheated or overcurrented, thus guarantee the security and reliability of pump's run even in the atrocious environment.
Clean pump:
Condition of usage:
1. The depth for the electrical pump below the water is no more than 5m
2. The temperature of the water is no higher of 40C
3. The pH figure of the water is between 6.5-8.5
4. The grain diameter of the solids in the water is no bigger than 0.2mm