Discount Flying Probe Tester W12 From Direct Factory
W12
Operating in hundreds of plants across the world, the W12 has been selected by original equipment manufacturers (OEMs) and electronic manufacturing service (EMS) companies alike to meet their most demanding operational requirements.
W12 is a new generation flying probe tester. New capabilities and features have been designed in to tackle the next generation of test and QA challenges in electronic manufacturing.
Characteristic:
1. The overall frame structure
2. double guide rail
3. Screw drive
4. Large effective testing area
5. No needle marks
6. High precision and high speed
7. Large plate test
8. Capacitance method test
9. PCB, FPC testing
10. The CCD alignment
11. UCAM software data processing
Specification:
Items | Parameter |
| Operation system | Windows XP |
| Max.Test Size | 620*510mm |
| Min.Test Size | No limit |
| Max.Thickness | 6mm |
| Min.Thickness | 0.1mm |
| Resolution x/y | 5um |
| Min.Pad Size | 0.05mm (2mil) |
| Min.pad pitch | 0.05mm (2mil) |
| Test speed | 2500- 4500/min |
| Number of Test Probes | 2Front 2Rear |
| Probe Tip Force | 5- 30MILS(optional) |
| Data format | MNF1 AND MNF2 |
| Air supply demand | Barometer 3Par |
| Engineering Software | UCAM |
| CCD Cameras | 1Front 1Rear |
| Test Voltage | 1mA- 200mA |
| Continuity Test | 2ohm- 10kohm |
| Isolation Test | 5Mohm- 500Mohm |
| Hiram Testing Scope | 0.1pF- 10mF |
| Environment | 18℃- 32℃ |
| Electrical Power | 220V |
| Weight | 800kg |
| Physical Dimensions | 1800*760*1800mm |
What are the advantages of our products?
1. Software upgrades every year.
2. The overall frame structure，not deformation，more stable.
3. We adopt imported guide rails from Taiwan and Japan and belts from Italy.
4. We are ahead of the peer, pioneered the use of closed-loop stepper motor, more accurate.
5. The overall high level configuration of the machine makes high accuracy, good speed and stability.
Contact
Supplier
