Brand | Daylightrf® |
Model number | DL-4053C |
Working voltage | 3V |
Working Current | 24mA±2mA |
Static currentr | 1.4uA±2uA |
Working range | 90m in the open air |
Material | ABS |
MOQ | 1000 pcs |
Lead time | 15 to 25 working days or negotiable |
Port of loading | Shenzhen, China |
Payment terms | Paypal, Western Union, T/T or negotiable |
Please kindly note that all the brands in the table 3.0 can be copied by DL-4053C
◇Step1: Press together 2nd button and 3rd button for 3 seconds, the LED will be on then go off (about 1 second) till LED will be on again, release the buttons. Which means it’s entering into learning mode. Please see fig 1.
◇Step2: Press 1st button once. Please see fig 2.
◇Step3: Place the original remote in front of DL-4053C, about 2-3cm distance. Please see fig 3.
◇Step4: Keep pressing any button of original remote till the DL-4053C LED blink. It means the code has been successfully stored. Please see fig 4
Please repeat the above steps for the 2nd,3rd ,4th buttons of DL-4053C.
Attention: BFT, FAAC 433-868 SLH has different operation as bellowing
BFT
◇Step1: Press 2nd button and 3rd button at the same time(about 3 seconds), the LED will be on then go off (about 1 second) till LED will be on again, release the buttons. Which means it’s entering into learning mode. Please see fig1.
◇Step2: Press 1st button once. Please see fig2.
◇Step3: Place BFT remote in front of DL-4053C, about 2-3cm distance. Press any BFT button you want to copy (1-3cm distance from DL-4053C ) till DL-4053C LED light on, release the buttons. Please see fig3 .
◇Step4: Keep pressing the 1st and 2nd button of BFT at the same time (or the rear button), till DL-4053C LED blink, release the buttons. The above successfully copied.
Please repeat the above steps for the 2nd,3rd ,4th buttons of DL-4053C.
FAAC 433-868 SLH (The original FAAC remote control must be MASTER remote)
◇Step1: Press together DL-4053C’s button 2 and 3 for 3 seconds, the LED will be on then go off (about 1 second) till LED will be on again, release the buttons. Which means it’s entering into learning mode. Please see fig1.
◇Step2: Press 1st button once. Please see fig2
◇Step3: Place FAAC remote in front of DL-4053C, about 2-3cm distance. Press any FAAC button you want to copy till DL-4053C LED light. Please fig 3.
◇Sept4: Press 1st and 2nd button at FAAC for 2 seconds, till FAAC remote flashes, release the buttons. Then press any button at FAAC till DL-4053C’s LED blink. It means you copy successfully.
Please repeat the above steps for the 2nd,3rd ,4th buttons of DL-4053C.
Notification: For GENIUS remote, the best distance for copying is 4-7cm.
Please kindly note that all the brands in the table 1.0 can be program into original receiver
Get close to the receiver and press together DL-4053C buttons 1 and 3 for 3 seconds, the LED will be on then go off (about 1 second) till LED will be on again, release the buttons. Which means it’s entering into remotely program mode. Then press any DL-4053C’s button that you already copied once, to indicate that remotely program procedure has started. After 8 seconds, wait the activation of the receiver (gate opening, lights starting, etc..) The remote control has been memorized.
Attention: If the receiver doesn’t work, the “remote program function” maybe disarmed, if so please operate it manually.
Please kindly note that fixed code remote after copying, DL-4053C can act as the original remote and do not need to program with receiver.
Table 1.0
List 1 | List 2 |
Italy | KING GATES |
ALLMATIC | STYLO 4 |
B.RO OVER, B.RO 2WN, TECH3, MINIPASS, BRO.STAR | MHOUSE |
APRIMATIC | TX4, TX3, GTX4 |
TR2/4, TM4 | NICE |
BENINCA | SMILO2/4, FLO1/2/4R-S,VERY VR, FLO1/2/4 |
TO.GO2 /4 VW, TO.GO2/4 QV, IO, T2/4 VW | VDS |
BFT | TRQ, ECO-R |
MITTO 2/4M, MITTO 2/ 4A, MITTO RCB02/04, GHIBLI, KLEIO, TRC2/ 4, RB4 MURALE | V2 |
CARDIN | PHOENIX 433-868, TXC, TSC, TRC, HANDY |
S449 TRQ449100/TRQ449200/ TRQ449300/TRQ449400, TXQ449200/TXQ449300/ TXQ449400, S486:TRQ486200/ TRQ486400, TXQ486200/ TXQ486400 | PUJOL |
DITEC | VARIO, MARTE |
GOL4, BIXLP2/2 RED, BIXLG4 | Australia |
FAAC | BOSS |
XT4 433 RC, TE4433H | BHT4 |
FADINI | France |
JUBI SMALL, JUBI-2, JUBI-4 | ADYX |
GENIUS | BRAVO, TE4433H, TE4433H BLUE |
BRAVO TE4433H, ECHO | PRASTEL |
GIBIDI | MPSTF2/F4RE, MPSTL-1E/2E/4E, MPSTP2E/2E BLUE, MT4E/2E, BFOR, TRQ4P, TC2E, TRQ2P |
AU1680 WOOD, GIBIDI AU1610/1680, AU1810/1600, AU01590 AUO3000 DOMINO, DTC 4334 | SOMFY |
TELIS 1/ 4 RTS |
If customers buy an DL-4053C remote, but they lost their original remote, they can re-generate an original remote.
◇Step1: Press together 1st button and 4th button for 3 seconds, the LED will be on then go off (about 1 second) till LED will be on again, release the buttons. Which means it’s entering into Re-generate mode. Please see the fig1.
◇Step3: Confirm the brand. Press 3rd and 4th button at the same time. Till LED blink, release the buttons. Now the DL-4053C remote is functioning a new BFT MITTO remote. Please see fig2.
Note1.If you are using DL-4053C to regenerate a FAAC 4 buttons remote, then re-generate a BFT 2 buttons remote, the in the DL-4053C remote, 1st and 2nd button is BFT code, 3rd and 4th button is FAAC code.
Note2.If you press 1 time, the DL-4053C’s LED flashes once; If you press 2 times, the DL-4053C’s LED flashes twice and so on.
Table 2.0
Remote | Press 1 time | Press 2 times | Press 3 times | Press 4 times |
1st button | BFT MITTO | BENINCA cupido | NICE SMILO | NICEFLOR-S |
2nd button | FAAC XT4 433 SLH | CAME TOP-432NA | DITEC DOL4C | |
3rd button | SUPERLIFT | NOVA | V2 PHOENIX2 | DOORHAN TRANSMITTER 4 |
4th button | BOSS BHT4 | ATA PTX4 |
Copying list | |
Table 1.0+Table 2.0+Follows brands | France |
Italy | SOMFY |
CAME | KEYTIS 2/ 4 NS,KEYGO 4 RTS,SOMFY 433-NLT4 BEIGE, SOMFY 433-NLT2 RTR, SOMFY TX2 433MHZ |
TAM 432 SA, TOP 432 / NA, TOP 432 SD, TOP 432/434 EV | United states |
DEA | CHAMBERLAIN LIFTMASTER MOTORLIFT |
TR2 /4 MIO,GENIE R, TS2/4 MIO 868/ 868 | 94335E, 4333E, 4335E, 94334E, 4333EML, 4335EML, 84334EML, 4335EML |
FAAC | Germany |
XT2/XT4 433 SLH, XT2/XT4 868 SLH, XT2/XT4 433 SLH LR, XT2/XT4 868 SLH LR, T2/T4 433 SLH, T2/ T4 868 SLH, TML2/TML4 433 SLH, TML2/TML4 868 SLH, DL2/DL4 868 SLH. | SOMMER |
KEY | 4014 TX03-434-2, 4013 TX02-434-4, 4022 TX03-434-2, 4026 TX03-868-2, 4020 TX03-868-4, 4025-TX02868.4011, 4010 |
900TXB - 42R, SUB44, TXB-44R, TXG-44R | APERTO |
NICE | TX02-434/868-2, 4025 TX02-868-2, 4022 TX02-434-2, 4020 TX-03-868-4, 4013 TX03-434-4 |
ONE:ON1/2/4/9, ONE ERA:ON1/2/4/9E, INTI1/2 | South Africa |
SEAV | Centurion |
BE-HAPPY-RS1/2/3, BE-SMART RSX, BE-HAPPY RH1/2/3 | NOVA |
TELCOMA | Brazil |
FM 402/402 E | Australia |
ATA | Peccinin |
PTX4 | Rossi |
MERLIN + 2.0 | |
E945M, E943M, E940M, E940M | |
MERLIN | |
M842, M832, M844, C945, C940, C943 | |
SUPERLIFT | |
Russia | |
DOORHAN | |
TRANSMITTER 4 |
·BY EXPRESS
By Express(DHL, UPS, TNT) is door to door service. Customer just need to wait for the packages in the office.
·BY AIR
By air is door to airport service. Customer should pick up the goods from the airport by himeself.
·BY SEA
By sea is door to port service. Customer should arrange the transportation from port to the office.
Contact
Supplier
Computer Hardware & Software
Electronic Cigarettes
Camera, Photo & Accessories
Home Audio, Video & Accessories
Mobile Phone & Accessories
Portable Audio, Video & Accessories
Blockchain Miners
Chargers,Batteries & Power Supplies
Mobile Phone Parts
Presentation Equipment
Smart Electronics
Earphones & Accessories