The surface of the metal embossed plate is a high-quality color relief veneered metal plate treated by a special layer. The middle layer is a hard high-density phenolic foam insulation heat-insulating layer treated by flame retardant treatment, and the bottom surface is used for heat insulation and moisture proof. Aluminum foil protective layer. The standard length is 4000mm; the thickness is 16mm; the height is divided into 375mm and 385mm according to the different pattern of the board.
Thermal insulation, energy saving:
The metal embossed plate has excellent thermal insulation properties, and has excellent cold resistance and heat insulation performance compared with the traditional external wall insulation decorative building materials. Energy consumption in heating and cooling is greatly reduced, thereby saving energy costs. The product has high cost performance and shows an absolute advantage in the exterior wall insulation decorative materials.
Easy to install, save costs
The metal embossed plate is light in weight and small in size, and weighs only 3.6 kg per square meter. Time and effort for handling and installation.
The installation method is simple and fast, and is not limited by the seasonal climate and geographical environment. The significantly shortened engineering cycle not only speeds up the project schedule, but also saves construction costs and reduces overall cost.
The metal embossed plate achieves the decoration and thermal insulation effect while minimizing the external wall load and enhancing the availability of space and land.
Light and economical, earthquake-resistant and crack-resistant:
The metal embossed plate is light in weight, high in strength and good in impact resistance. Its light weight not only reduces the burden on the building itself, but also greatly reduces the impact of the earthquake on the building. The board is installed on a light steel structure, which is strong in integrity, shockproof and crack resistant, and strong and safe.
Tempering | O,H12,H14,H16,H18,H19,H22,H24,H26,H28,H32,H34H36,H38,H111,H112,H114,H 116,H321 |
Surface | mill,bright,polished,hair line,brush,sand blast,checkered,embossed,etching,etc |
Thickness | 0.2-200mm |
Width | 50-2200mm |
Length | 500-6000mm or above |
Thickness tolerance | + 0.05mm |
Width / length tolerance | + 2mm |
Minimum quantity | 5-10 tons |
Grade | Chemical Composition(%) | Others | AI | ||||||||
| Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Single | Tol | 99.5 |
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | - | 0.05 | 0.03 | 0.03 | - | 99.6 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 0.03 | - | 99.7 |
1070 | 0.2 | 0.25 | 0.04 | 0.03 | 0.03 | - | 0.04 | 0.03 | 0.03 | - | 99 |
1100 | 0.95 | 0.05~0.4 | 0.05 | - | - | 0.1 | - | 0.05 | 0.15 | Remains | |
3003 | 0.6 | 0.7 | 0.05~0.2 | 1.0~1.5 | - | - | 0.1 | - | 0.05 | 0.15 | Remains |
3004 | 0.3 | 0.7 | 0.25 | 1.0~1.5 | 0.8 | - | 0.25 | - | 0.05 | 0.15 | Remains |
3005 | 0.6 | 0.7 | 0.3 | 1.0~1.5 | 0.2~0.6 | 0.1 | 0.25 | 0.1 | 0.05 | 0.15 | Remains |
3105 | 0.6 | 0.7 | 0.3 | 0.3~0.8 | 0.2~0.8 | 0.2 | 0.4 | 0.1 | 0.05 | 0.15 | Remains |
5052 | 0.25 | 0.4 | 0.1 | 0.1 | 2.2~2.8 | 0.15~0.35 | 0.1 | - | 0.05 | 0.15 | Remains |
5083 | 0.4 | 0.4 | 0.1 | 0.4~0.1 | 4.0~4.9 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Remains |
5754 | 0.4 | 0.4 | 0.1 | 0.5 | 2.6~3.6 | 0.3 | 0.2 | 0.15 | 0.05 | 0.15 | Remains |
5005 | 0.3 | 0.7 | 0.2 | 0.2 | 0.5~1.1 | 0.1 | 0.25 | - | 0.05 | 0.15 | Remains |
5086 | 0.4 | 0.5 | 0.1 | 0.2~0.7 | 3.5~4.5 | 0.05~0.25 | 0.25 | 0.15 | 0.05 | 0.15 | Remains |
6063 | 0.2~0.6 | 0.35 | 0.1 | 0.1 | 0.45~0.9 | 0.1 | 0.1 | 0.1 | 0.05 | 0.15 | Remains |
6041 | 0.4~0.8 | 0.7 | 0.15~0.4 | 0.15 | 0.04~0.35 | 0.04~0.35 | 0.25 | 0.15 | 0.05 | 0.15 | Remains |
5052 alloy aluminum plate is widely used in the manufacture of fuel tanks, oil pipes and transportation vehicles, ship sheet metal parts, instruments, street lamp brackets and rivets, hardware products, electrical enclosures, molds, etc. It can also be used for low load parts that require high plasticity and good weldability, working in liquid or gaseous media, such as fuel tanks, gasoline or lube oil conduits, various liquid containers and other small load parts made with deep drawing: Wire is used to make rivets.
Contact
Supplier