RO reverse osmosis membrane 10500GPD ((39.7m3/d) ULP32-8040
Product Description
ULP (Ultra Low Pressure) series are the ultra low-pressure aromatic composite
membrane elements, applicable to desalination of surface water and underground
water. It can work under ultra low pressure to reach as high permeate flow and
salt rejection as regualr low-pressure composite membrane, and achieves a salt
rejection rate of up to 99.5%, which can decrease the investment costs for such
relevant facilities as pump, piping, and container,etc. and operating cost for the
RO system, thus increasing the economic efficiency.
Testing Conditions:
Testing Pressure: 150psi (1.03 Mpa)
Temperature of Testing Solution: 25°c
Concentration of Testing Solution (NaCl) 1500ppm
PH Value of Testing Solution: 7.5
Recovery Rate of Single Membrane Element: 15%
Extreme Operation Conditions
Max. Operating Pressure: 600psi (4.14Mpa)
Max. Feedwater Flow: 16gpm (3.6m3/h)
Max. Temperature of Feedwater: 45°c
Max. SDI of Feedwater: 5
Free Chlorine Concentration of Feedwater: <0.1ppm
PH Value Range of Feedwater as Continuous Operation: 3-10
PH Value Range of Feedwater as Chemical Cleaning : 2-11
Max. Pressure Difference of Single Membrane Element: 15psi (0.1Mpa)
Reverse Osmosi Membrane Advantages
>1. High flux, low energy consumption and long life.
>2. Imported high quality raw material.
>3. Simple and economic module replacement.
>4. Various choices of module dimensions.
Contact
Supplier