Square Pressure Fiber Optic Polishing Machine
It's controlled by four angles, thus the pressure is more precise to control and the final products have higher precision; For PC terminations above 95% could pass 3D interferometer test, while for APC terminations this rate keep 90%;
Each polishing jig for this machine is available as LC, SC, ST, FC, MTRJ, E2000 PC connector as well as angle polishing; May process each kind of standard fiber optic connectors, such as FC/UPC/APC,SC/UPC/APC, ST/UPC/APC, LC/UPC/APC, ,MU/UPC/APC, MTRJ,E2000/UPC/APC etc.
Model | SPPM01 |
Pressure Source | Coil Spring |
Application | 2.5mm PC, APC/1.25 PC, APC, MT, mini-MT |
Input Voltage | 100-120VAC, 50/60Hz or 220-240VAC, 50/60Hz |
Size | 390*310*370mm |
Weight | 27kg |
1. Convenience for adjusting pressure, unloading and replacing jigs; 2. Excellent connector and face polishing quality, the percentage of products sent back for repair is very low; 3. Save material and low cost for grinding; 4. Easy to use and stable; 5. Display grinding speed which can be adjusted any time; 6. Control the direction with pro and con, convenience for Adjustment; 7. Toothed gearing, more stable and deep-set.
Contact
Supplier