Flat 2D carbon fiber vinyl for car wrap Specification:
Size: | 1.52*30 m, 1.27*30 m |
Film Material: | PVC |
Adhesive: | Removable PSA |
Face Film Thickness: | 120-140 micron |
Release Paper: | 120 gsm embossing paper |
Warranty: | 1-3 years outdoor |
Available Color: | Black(CF371), Gold(CF372), Black square grid(CF374), Gold square grid(CF374), white(CF375), Red(CF376), Yellow(CF377), Light Green(CF378), Blue(CF379) |
Flat 2D carbon fiber vinyl for car wrap Features:
Extremely high gloss and smooth surface
Can be applied to moderate curves or any smooth flat surface
Limited Stretch with heat for more flexible install
Coated with a UV protective layer
Durable material resistant to water, dirt, grease, salt, mild acid and oil
Easily cleansed with water
Easily remove without residue, will not harm the painted surface of your vehicle
How to Install:
1. First volume of a good length for your body size, according to the amount of good film cut to size the length of a good car, cutting out it.
2. To clean the surface and around the body in order to avoid dust, you can spray some of the appropriate mixture of water and lube to the car body and car membrane for water and scraping the mucous membrane when the bubble.
3. Film when the surface curvature is large, the wind can be a hair dryer or heat gun can be attached more perfect.
4. Finally, the body lines with a knife according to film, the excess membrane can be torn off, the construction is completed.
Graphic of install step:
Contact
Supplier