Lock body dimension
Full Set Door Lock with Lock cylinder and Handle SM-502503ET-50E-SS
Brand:
seleco
Finish Selection:
brush，polish，chrom
Item No:
sm-502503et-50e-ss
Material:
304# stainless steel
Instalaltion Method:
instalaltion method
Lock Body:
50e single-bolt mortise lock body
Cylinder:
single beads insert cylinder with 5 bead core
Keys:
3pcs copeer keys
Backset:
50mm
Door Thickness:
40-50mm
Available for:
all kinds of wooden doors
Applicable standard:
qb/t2474-2000
Packing:
in seleco standard packing or in neutral packing
Payment Terms:
30% before star production,70% before delivery by tt;30% before star production,70% lc
Shipping Way:
ocean/ air/railway/express
Delivery Time:
depend on quantity,almost 25-30 days.
Brand:
seleco
Finish Selection:
brush，polish，chrom
Item No:
sm-502503et-50e-ss
Supplier Info.
Company Name： Seleco Hardware Decoration Products Co.,Ltd.
Registration Date：
1989
Country / Region：
guangdong / China
City：
foshan
Main Products：
wholesale door hardware, door hardware parts, door hardware supply
Product Detail
▍ Products Size
▍ Lock Body Information
- Brush
- SUS304 Stainless Steel/Cold rolldl Sheet
- 50
- 45mm
- Ramp-type three mute tongue,tongue oblique lock open finishing up the way
- Oplique bolt turn left and right open
- Room door,Bathroom door,all kinds of wooden door
- 72X69X16mm
- QB/T2474-2000
Single beads insert cylider with 5 bead core
3PCS Copper Keys
▍ Products Accessorris List Details
▍ Installation Instruction
Installation Instruction
1.Ensure the slope at the latch bolt in accord with the shutdown direction.
2.Drill the hole for lock body as per the writeen instruction, insert the square shaft to the square hole of lock body,the Dipped finish of the square shaft must toward the direction of the top screw hole of lever handle.
3.Install faceplate and lever handle, insert lock cylinder and fix it by screws, adjust the inside and outside faceplate in a proper position.
4.Install plastic pocket and striking plate, enable it can be use with the lock latch smoothly.
5.Debugging the lock,if the latch bolt can be retractile by truning the lever handle and the dead bolt can be retractile by Turing the key and inside insurance button,it is in correct installation,finally tighten the fixing screw.
2.Drill the hole for lock body as per the writeen instruction, insert the square shaft to the square hole of lock body,the Dipped finish of the square shaft must toward the direction of the top screw hole of lever handle.
3.Install faceplate and lever handle, insert lock cylinder and fix it by screws, adjust the inside and outside faceplate in a proper position.
4.Install plastic pocket and striking plate, enable it can be use with the lock latch smoothly.
5.Debugging the lock,if the latch bolt can be retractile by truning the lever handle and the dead bolt can be retractile by Turing the key and inside insurance button,it is in correct installation,finally tighten the fixing screw.
▍ Change Direction
▍ Door Opening Direction Shown
Contact
Supplier
Contact us
Tell us your Buying Requirements
You Might Also Like
