GL Series Automotive Car Spray Booth Oven
--Wall panel: sandwich style, δ=50mm, rock wool,polystyrene is available as required.
--Basement: steel structure, 3 rows of vein board and 2 rows of grids, full grids as optional.
--Door: 3 pcs of front door without aluminum side cover. 1pc of emergency door with pressure lock.
--Ramp: 2 pcs of vein board.
--One 7.5kw intake fan and one 5.5kw exhaust fan.
--4m straight exhaust ducts, one 90° bend, and one 60° bend.5m straight chimney and 2 small bends.
--Spraying/baking transition damper, automatically air controlled.
--Heat exchanger: stainless steel. Riello G20 burner.
--Roof filter: 4 pcs of filter, mounted above support frame,which is made of steel and powder coated.
--2 pcs of floor filter and 1 pc of outlet filter.
--Upper light: 10 sets, 4*40w per set. side lights: 8sets,2*40w.
--Control box: components is import, overload, overheat, phase-lacking protection, engine Y star-delta start.
--Automatically stop when preset time is up.Constant temperature spraying.
--Environmental filter: either M style or drawer style active carbon equipment can be adopted.
Technical Specifications | GL2000-A1 |
External size(m) | 7.0×5.6×3.5 |
Internal size(m) | 6.9×3.9×2.7 |
Door width(m) | 3.0 |
Door height(m) | 2.66 |
Air flow (m3/h) | 30000 |
Inside no-load air speed(m/s) | 0.3-0.5 |
Power (kw) | 25 |
Water-based device | As option |
Vehicle suited | Saloon car |
Contact
Supplier