Technical Data | SE-208 |
Edge band thickness | 0.4-3mm |
Workpiece thickness | 10-60mm |
Conveyor speed | 20m/23m/26m/min |
Min.width of workpiece | 60mm |
Min.workpiece length (without pre-milling) | 120mm |
Min.work piece Length (Using Pre-milling) | ≥250mm |
Total power | 21.5kw |
Working voltage | 380V,50Hz |
Air pressure | 0.7Mpa |
Weight | 3100kg |
Packing size | 9250x 1050x 1850mm |
Intelligent Controlling System
Machine installed with LCD Touch Screen and human-machine interface controlled.Equipment failure messages and troubleshooting methods can be intuitively displayed by images and text.Which is convenience for maintenance and easy to operate.
Double Edge Band Loading Device
Loading disc can install two rolls of edge band tape,when each of them finished,the color alarm lamp will light up.
Automatic Lubrication System
Automatic lubricating the guide rails on end trimming unit,to make sure its smoothly sliding.
Quick Corner Trimming
Adopt 4 SETS of high speed round contouring trimming device,realize the stable and rapid corner trimming.
Automatic Lifting Device
Pressure beam can be adjusted automatic up and down,directly controlled by the touch screen,makes operation easy and fast.
Motor Frequency Conversion Device
Each trimming unit are controlled by independent converter(except buffing and scraping unit),effectively reduce the maintenance cost.
Quick Melt Gluing Device
Installed with Germany import liquid level controller,accurately control the additive glue amount.Realize the continuously heating control,and satisfy the requirement of high speed edging and gluing.
Crawlar Belt Feeding Devivce
Crawler belt and workpieces running at the same time,without rolling friction,for better protect the surface of workpieces.Suitable for high speed edging request.Strengthening pressure roller device installed near the pre-milling unit,to enhance the clamping force of the belt,ensure the milling precision.
Separating and Cleaning Medium Spraying Device
Before pre-millling,separating medium sprayed on the side of the workpiece,to avoid the glue pollution, effectively cleaning the edge. While cleaning medium sprayed after edge trimming,combine with the buffing,realize edge appearance clean and perfect.
Contact
Supplier