1.Technical parameters:
No. | Name | Unit | Data |
1 | Drawing type |
| LZ7/600 |
2 | Tuning type |
| Straight line tuning |
3 | dawing passes |
| 7 |
4 | Block diameter | mm | Φ600 |
5 | Speed adjustable |
| AC freq. Con. Speed Adjustable |
6 | Motor power | KW | 7×22 |
7 | Inlet wire diameter | mm | Max Φ6.5 |
8 | End product diameter | mm | Min Φ2.4 |
9 | Average compression | % | ≤20% |
10 | Design drawing speed | m/s | Max.16m/s |
11 | Control mode |
| Fully digital |
12 | Logical control |
| PLC |
13 | Inlet Wire strength | MPa | ≤1250 |
14 | Carbon content in material |
| Carbon spring wire steel, high carbon steel |
15 | Drum cooling |
| Inside using "Narrow-Gap" water cooling,Outside using Forced Air Cooling. |
16 | Die box |
| Direct water cooling |
17 | Cooling water pressure |
| 0.2~0.3Mpa |
18 | Pneumatic system |
| Air pressure≥0.5Mpa |
19 | Stop time | S | Normal stop≤50s,EMG stop≤5s |
2.LZ200-1200 wire drawing machine serous:
High carbon steel wire, low carbon steel wire, stainless steel wire, steel core ,CO2 gas shielded welding wire,flux cored welding wire.
Model | LZ 200 | LZ 280 | LZ 350 | LZ 400 | LZ 450 | LZ 500 | LZ 560 | LZ 600 | LZ 700 | LZ 800 | LZ 900 | LZ 1200 |
Drawing Passes
| ~14 | ~12 | ~12 | ~12 | ~12 | ~12 | ~12 | ~10 | ~9 | ~9 | ~9 | ~9 |
Max.Inlet Dia.(mm) | 1.4 | 1.8 | 3.5 | 4.2 | 4.6 | 5.5 | 6.5 | 6.5 | 8 | 10 | 14 | 16 |
Min.Outlet Dia(mm) | 0.2 | 0.4 | 0.6 | 0.7 | 0.8 | 1 | 1.35 | 1.8 | 2.5 | 3 | 3 | 3 |
Drawing speed | Design and determine speed & power according to drawing material strength and customer’s requirements | |||||||||||
3.wire drawing machime pictures:
Contact
Supplier
