Material Parameter
◪ 1.The steel pipes used are all hot-pressed seamless steel pipes, all of which are made of Q235 and conform to GB700-88. |
◪2.The pipe-to-pipe cross-links and pipe-to-connector connections may use butt welds or full-period fillet welds. |
◪ 3.All butt welds must be cut-through welds. These welds are not specifically graded as Class 3. |
◪ 4.The unwelded weld is a fillet weld with a weld not less than 4mm. All exposed openings have a sealing plate and a thickness of 4mm. |
◪ 5.The bolts are not shown in the figure as galvanized ordinary large hex head bolts, in line with GB5780-86; nut in line with GB41-86. |
◪ 6.Manual welding using E43xx welding rod, welding wire and flux used in automatic welding and semi-automatic welding shall ensure that the tensile strength of the deposited metal is not lower than that of the corresponding manual welding electrode. |
◪ 7.The film cloth is made of white PVDF film material. |
◪ 8.The material of the steel wire rope conforms to the universal wire rope standard "GB/T8918-1996". If this project is adopted, it is a hemp wire rope with a nominal tensile strength of 1570 and the surface is galvanized. |
Contact
Supplier
Aluminum Composite Panels
Balustrades & Handrails
Bathroom
Boards
Building Glass
Ceilings
Countertops,Vanity Tops & Table Tops
Curtain Walls & Accessories
Decorative Films
Door & Window Accessories
Doors & Windows
Faucets, Mixers & Taps
Flooring & Accessories
Formwork
HVAC Systems & Parts
Kitchen
Ladders & Scaffoldings
Masonry Materials
Metal Building Materials
Mosaics
Quarry Stone & Slabs
Real Estate
Stairs & Stair Parts
Tiles & Accessories
Door, Window & Accessories
Stone