IP-BUS To DALI Gateway
Model: IP-G-DALI
Input voltage: Supplied via IP-BUS bus
Communication protocol: IP-BUS
The number of DALI equipment: 64
The number of dry contact: 1
IP-BUS To DALI Gateway IP-G-DALI
In the IP-BUS system, the user can control the equipment complying with DALI standard protocol via IPG-DALI gateway. The user can assign（including reassign, extent allocation） the address for DALI equipment, and can set group, scene, the switch-on brightness, the minimum brightness, the maximum brightness, fadetime. In addition, the user can know the state of DALI equipment via PC software or information set in advance.
Product Features
• Assign（including reassign, extent allocation） the address for DALI equipment
• In IP-BUS mode, can update firmware remotely via IP-BUS interface
• Support IP-BUS function to the DALI command
• Set parameter for DALI equipment, and, can be used with the DALI sensor, DALI panel
• Support IP-BUS to DALI command function
• Supplied via IP-BUS bus, without external power supply
• The standard 35mm din rail, convenient installation
Technical Parameter
Item | Parameters |
Input voltage | Supplied via IP-BUS bus |
Communication protocol | IP-BUS |
The number of DALI equipment | 64 |
The number of dry contact | 1 |
Equipment size | 76*93.4*63.2mm(L*W*H),standard 35mm din rail |
G.W. | 250g |
Operational temperature | -20-50℃ |
Relative humidity | 20-90%RH |
Contact
Supplier
