IP67 Non-flush LM18 PNP NPN 3Wires Inductive Proximity Switch Sensor
--- Small size ,long life
--- High precision of repeated location
--- various types of structures
--- Many output forms , good anti-interference
--- High on-off frequency ,wide range of voltage
--- Dust proof, vibration proof, waterproof and oil proof
--- short-circuit protection and inverted connecting protection
Inductive Proximity Sensor Technical data
φ6.5 | M8 | M12 | M18 | M30 | φ34 | |
Sensing Distance (mm) | 1mm | 1mm | 1-3mm | 2-8mm | 2-20mm | 2-25mm |
2mm | 2mm | 1-6mm | 2-15mm | 2-30mm | 2-35mm | |
2mm | 5mm | 2-25mm | 2-30mm | |||
4mm | 8mm | 10mm | ||||
15mm | ||||||
Material | Stainless steel/ nickel-clad copper/ PBT | |||||
Installation Type | Flush/ non-Flush | |||||
Output Type | DC 3wire NPN NO | |||||
DC 3wire NPN NC | ||||||
DC 3wire PNP NO | ||||||
DC 3wire PNP NC | ||||||
DC 4wire NPN (NO+NC) | ||||||
DC 4wire PNP( NO+NC) | ||||||
Type | Standard Function | |||||
Enhance Distance | ||||||
Pipe-type and High Temperature Resistance Level |
DETECTION DISTANCE 8MM | ||||
Non-Flush | DC10-30V | NPN | NO | LM18-3008NA |
NC | LM18-3008NB | |||
NO+NC | LM18-3008NC | |||
PNP | NO | LM18-3008PA | ||
NC | LM18-3008PB | |||
NO+NC | LM18-3008PC | |||
Two wire system | NO | LM18-3008LA | ||
NC | LM18-3008LB | |||
AC90-250V | SCR Control-lable silicon | NO | LM18-3008A | |
NC | LM18-3008B | |||
NO+NC | LM18-3008C | |||
Relay output | ||||
Control output | DC | 200mA | ||
SCR/ Relay | 300mA/2A | |||
Output voltagc drop DC/AC | NPN/PNP< 3V,Two wire< 3.9V | |||
AC< 10V | ||||
Consumption current | DC< 15mA, AC< 10mA | |||
Standard detected object | 18*18*1(A3 iron) | |||
Repeated precision | 0.02 | |||
DC/AC | 200HZ/25HZ | |||
Working Environment Temperature | –25℃~75℃ | |||
Insulation resistance | 50MΩ | |||
Shell material | Metal | |||
Protection grade | IP67 | |||
Altemative model at home and abroad | LJ18A3-8-Series |
more products:
FAQ
1. Could I put my own logo on it ?
--- Yes , we can print your logo according to your requirements.
2. How long to make a sample ?
--- it will take around 2-3 working days if samples in stock.
3.How to confirm the sensors?
--- Please advise following information :
Voltage ; NPN/PNP ; NO/NC/NO+NC ; Detected object ; Detected distance...
Contact
Supplier