Large production Industrial Ice Cube Machine China supply for bars

 1 Tons Industrial Ice Cube Machine CV Series 

Cube Ice : It belongs to edible granular ice. we drinking wine, cola and other drinks with cube ice. Widely used in hotels, bars, restaurants, banquet hall, milk tea shop, cold drink shop, KTV etc.

 1. Large Ice Cube machine optional size : 22*22*22, 29*29*22

    The Cube ice  is  edible, clean and sanitary 

2. Large production volume: The production rate can reach 90% ~ 95%, when in summer,and it  can reach 100% ~ 130% when the ambient temperature is lower than 23 °C

3. Low electric power consumption: In summer, the electric power consumption is about 85 kw.h when producing 1 ton ice. When the bmbient temperature is lower than 23  °C, the electric power consumption is 70 to 80 per ton. 

4. Easy to operate: We adopt PLC system design, one key operation to start or stop the machine. Full automatic ice outlet when you step on the Foot Switch, dont need to scoop the ice. Which reduce the secondary pollution from human and more convenient to pack ice.

5. Ice Molds: Nickeled Copper Ice Mold, which can resistant to 70% following concentrated nitric acid erosion.When washing ice machine,the low concentration of acetic acid will clean not thorough,high concentrations will eroded ice mold. And our ice mold can avoid this problem.

6. Earthquake-proof: Fixed the copper tube and Protect and shockproof coper tube. The shockproof size is fixed in front of the copper tubes and evaporator welds,which  can avoid being damaged during  transport or use.

7. Ice storage: We leave some  holes to leak the melt  water. It prevent the water from freezeing again and lead the outlet ice screw locked. The Ice is dry and beautiful.

8. Convenient to install: The machine unit had been tested in our factory for 24 hours continjously. So, the machine unit can start once electric power has been connected and water supply has been connected. 

9. Space-saved: Machine unit adopt 3D model, reasonable layout, integerated design, the structure is very compact .

Note:

1.The above information is on the basis of water-cooled condensing.

2.Size of machine is before installation. It didn’t included the size of cooling tower, which is usually installed outside the room.

3.Machine running condition: water temperature:23℃, evaporate temperature:-12℃, condensing temperature 40℃, reference valve under 50Hz power supply. Real production of machine will have a little change according to change of water temperature and ambient temperature.