LARK SUPER is an enhanced combination of the Lark Series, which is used for applications where the conditions are harsher and require higher sound pressure levels and farther transmission distances. The combination consists of LARK 802 full-frequency array module and LARK 212BA low-frequency module.
LARK SUPER is often used for reverberation of a long time or a large level of sound pressure level requirements of the relatively high end live performances, LARK802 combination will be recommended as an array to be used for this kind of applications.
Model | LARK 802 | LARK212BA |
Speaker Components | 8 x 4'' Nd / 2 x 1'' Nd Tweeter + waveguide | Dual active 12'' WOOFER |
Description | Combined Hybird Line Source Array Speaker System | RE-FLEX bandpass Low frequency speaker system |
Power AES / Peak | LF:360 W / 1440 W ; HF: 80 W / 320 W | 400W + 400W / 1600W + 1600W |
Impedance nominal | LF:4Ω / HF:4Ω | 8Ω + 8Ω |
SPL 1W / Peak @ 1 m | LF: > 100 dB / 131 dB HF: > 108 dB / 131 dB | 100dB / 135 dB |
Useble Range | 90 Hz - 20 kHz ( -6 dB ) | 35 Hz -250Hz |
Tuning Frequency excursion mini-mum | 120 Hz | 40 Hz - 160 Hz |
X - Over point acoustical | Depends on preset | Depends on preset |
Coverage horizontal / Vertical | 90° x 7° | N / L |
Mechanical Splay Angle | 0° -8° | 0° |
Electronic part | Non, Powered by active woofer | Built - in 4*600w power amplifier and DSP; Bridge mode drives per woofer. |
Connectors | 2 x Speakon NL4MP in / out | 1 XLR input , 1 XLR link-out, 1 PowerCON, 1 Powe-LOOP, 1 USB, 2 RJ45 RS485 |
Coding: | 1 +/- LF, 2 +/- HF | Non |
Weight ( KG ) | 17.2 | 50 |
Size ( height x width x depth ) ( mm ) | 450*310*380 | 700*460*600 |
Contact
Supplier